5612 products
5612 products
Sort by:
Hygrozyme UK’s most popular root stimulant Hygrozyme is a natural enzyme product which breaks down old roots into food for your plants while creating space for new roots to grow. Hygrozyme is completely unique in the way it is manufactured and it contains no living organisms. Hygrozyme can be used right through the entire growing process or as a soak to rid old mediums of dead roots and to prepare them ready for your next grow. Add Hygrozyme to your nutrient solution at a rate of 2ml/litre. Adjust pH as necessary. Use at the same rate for treating cuttings or seedlings and pre-treating rockwool cubes. As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one. Hygrozyme is an enzyme product like no other. It is created by an entirely unique fermentation process which produces a bacteria free product consisting of enzymes and amino-acid chains. The enzymes in Hygrozyme break down old roots and turn them into food for your plants. This makes space for new roots to grow into and creates a healthier root-zone. Though it is not certified as organic, Hygrozyme contains only natural ingredients and can be used very effectively as part of a natural feeding schedule. Because Hygrozyme contains no bacteria, the product has an almost unlimited shelf-life and can also be used with peroxide products.
The Hylite Slimline 120W 1000mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum.
The Hylite Slimline 190W 1500mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum.
Provides gentle, constant heat and keeps spaces aired • Available in 6 sizes from 1ft to 6ft • Helps prevent dampness, mould, mildew, condensation and freezing • Uses around 25% less energy than most other tube heaters • Safe to use where it may come into contact with water (IP55 compliant) • Supplied with wall brackets • CE approved and compliant with BS EN 60335/1:2002 • Comes ready-wired to run on standard 230/240V power supply • Ideal for use in built-in wardrobes, conservatories, sheds, garages, caravans,
The Hylite Slimline 28W 300mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum.
The Hylite Slimline 55W 500mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum.
The Hylite Slimline 90W 750mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum.
What is Hypo Pure?
Hypo Pure is a disinfectant concentrate based on hypochlorous acid (HOCL), which is used in professional hygiene management for disinfection of surfaces, equipment/tools, water/liquids and air.
Hypo Pure kills fast and reliably harmful bacteria, fungi, algae and viruses, e.g. Escherichia coli - Salmonella Typhimurium - Staphylococcus aureus - Pythium spp. / Phytophthora spp (root rot) - Botrytis cinerea (grey mould) - Peronosporale (downy mildew) - Erysiphaceae (powdery mildew).
Biofilms in water-bearing systems are also effectively removed, and the regeneration is prevented.
Disinfection of Air by Spraying or Fogging (e.g. in Rooms, Cars, Greenhouses Propagators)
Prepare a 1:100 dilution (10 ml Hypo Pure per 1L of water).
For spraying, commercially available pressure sprayers are suitable.
Please note: Purified water should always be used for spraying and fogging applications (e.g. distilled water, deionised water or osmosis water). Complete wetting must be ensured! An ideal contribution is achieved by cold fogging - especially for room air disinfection.
Disinfection of Surfaces: (e.g. Walls, Equipment, Tools, Pots/Containers, Pipes or Tubes)
Prepare a 1:100 dilution (10 ml Hypo Pure 1L of water).
You can spray the mixture onto the surface or immerse parts with complex geometries. Pipes and tubes can easily be flushed.
Please note: If the surface is visibly dirty, it should be cleaned (mechanically) before being disinfected. Complete wetting of the surfaces must be ensured! The exposure time depends on the degree of contamination: 3-6 minutes.
Disinfection of Water (e.g. in Water reservoirs, Nutrient tanks or Air Conditioning
For preventive use, add 2-5 mL Hypo Pure to every 10 L of water directly to the water.
To treat an existing contamination, add 10-20 mL of Hypo Pure for every 10 L of water directly to the water.
Please note: At water temperatures below 23 ·c (74 °F), apply once a week with the lower dosage. At water temperatures above 23 ·c (74 °F), apply twice a week with the higher dosage.
We highly recommend preventive use! If you use organic fertilisers, enzymes, or microorganisms in hydroponic systems, you should observe a waiting period of 2 hours before using them after the water has been disinfected.
Disinfection of Inert Substrates
Prepare a 1:100 dilution (10 ml Hypo Pure per 1L of water).
Please note: Remove as many of the old roots as possible. Soak the substrate and let it rest for 24 hours. Suitable for all kinds of inert substrates
What is Hypo Pure?
Hypo Pure is a disinfectant concentrate based on hypochlorous acid (HOCL), which is used in professional hygiene management for disinfection of surfaces, equipment/tools, water/liquids and air.
Hypo Pure kills fast and reliably harmful bacteria, fungi, algae and viruses, e.g. Escherichia coli - Salmonella Typhimurium - Staphylococcus aureus - Pythium spp. / Phytophthora spp (root rot) - Botrytis cinerea (grey mould) - Peronosporale (downy mildew) - Erysiphaceae (powdery mildew).
Biofilms in water-bearing systems are also effectively removed, and the regeneration is prevented.
Disinfection of Air by Spraying or Fogging (e.g. in Rooms, Cars, Greenhouses Propagators)
Prepare a 1:100 dilution (10 ml Hypo Pure per 1L of water).
For spraying, commercially available pressure sprayers are suitable.
Please note: Purified water should always be used for spraying and fogging applications (e.g. distilled water, deionised water or osmosis water). Complete wetting must be ensured! An ideal contribution is achieved by cold fogging - especially for room air disinfection.
Disinfection of Surfaces: (e.g. Walls, Equipment, Tools, Pots/Containers, Pipes or Tubes)
Prepare a 1:100 dilution (10 ml Hypo Pure 1L of water).
You can spray the mixture onto the surface or immerse parts with complex geometries. Pipes and tubes can easily be flushed.
Please note: If the surface is visibly dirty, it should be cleaned (mechanically) before being disinfected. Complete wetting of the surfaces must be ensured! The exposure time depends on the degree of contamination: 3-6 minutes.
Disinfection of Water (e.g. in Water reservoirs, Nutrient tanks or Air Conditioning
For preventive use, add 2-5 mL Hypo Pure to every 10 L of water directly to the water.
To treat an existing contamination, add 10-20 mL of Hypo Pure for every 10 L of water directly to the water.
Please note: At water temperatures below 23 ·c (74 °F), apply once a week with the lower dosage. At water temperatures above 23 ·c (74 °F), apply twice a week with the higher dosage.
We highly recommend preventive use! If you use organic fertilisers, enzymes, or microorganisms in hydroponic systems, you should observe a waiting period of 2 hours before using them after the water has been disinfected.
Disinfection of Inert Substrates
Prepare a 1:100 dilution (10 ml Hypo Pure per 1L of water).
Please note: Remove as many of the old roots as possible. Soak the substrate and let it rest for 24 hours. Suitable for all kinds of inert substrates
