New version with ball bearings

Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.

AirBase Square will fit our 8.5 L / 2.2 gal and 15 L / 3.9 gal pots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.

Compatible with all Secret Jardin tents

This clip fan is ideal for moving air without taking up needed space. It was designed for use in tents with poles measuring Ø16mm–30mm

Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.

AirBase Round will fit our 25 L / 6.6 gal pots and 20 L / 5 gal fabric FlexiPots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.

Extractor Kit entry level fan/filter kit The Garden Highpro extractor kit comes in three sizes and is designed to be used as a budget ventilation kit for smaller tents. The fan is the garden highpro profan TT Max, the filter is a proactive carbon filter, lightweight and compact, it is made from coconut activated carbon and is matched to the air volume produces by the fan. The free-flowing design of the filters enables them to be fitted to the fans with very little change in flow rates. The complete kit comes in its own branded box and included inside is a fan, 5m aluminium ducting and two jubilee clips. Available in the following sizes: 100, 125 and 150mm.

Pro Filter introduces growers everywhere to the levels of adjustability and customisation favoured by commercial facilities. Different filter inserts can be used providing the grower with different micron options depending on their growing demands. Whilst professional growers demand precision they also require products that are durable, reliable and easy to maintain. Pro Filter was designed with these qualities in mind. The filter has a larger, drum-shaped filter area and a higher micron element for added protection against blockages. Its larger size makes dismantling and cleaning simple. Click Fit ProFilter includes click fittings to allow easy connection to standard hose connections and the FlexiTank tap.

The Autopot 16mm In-line Filter is a must-have for any hydroponic or irrigation system. With its 16mm diameter, it effectively removes debris and impurities, ensuring clean and efficient water flow. Equipped with high-quality filters, it improves the overall health and growth of plants. Enhance your system with this reliable and durable filter.

Autopot 16mm In-line Filter PF918/16

Extractor Kit entry level fan/filter kit The Garden Highpro extractor kit comes in three sizes and is designed to be used as a budget ventilation kit for smaller tents. The fan is the garden highpro profan TT Max, the filter is a proactive carbon filter, lightweight and compact, it is made from coconut activated carbon and is matched to the air volume produces by the fan. The free-flowing design of the filters enables them to be fitted to the fans with very little change in flow rates. The complete kit comes in its own branded box and included inside is a fan, 5m aluminium ducting and two jubilee clips. Available in the following sizes: 100, 125 and 150mm.

The Can-Lite has been developed with ease of installation, durability and effectiveness in mind. The can-Lite is manufactured using the same proven packed bed design as the original Can-Filter but utilizes high quality virgin activated Australian RC light weight granular carbon. Airflows start at 150m3/hr and includes filters all the way up to an impressive 4500m3/hr. The recommended lifespan of these filters is 18 months depending on humidity and odour concentration in the room. The larger filters are a compact 1metre long so they do not take up precious room in your growing area and are light enough to hang from standard 48kg hangers.

Designed to fit our DUCTING FLANGE system, our range of extractors can also be used conventionally by adding two DF16100 connectors, 125 or 150mm.

The interface allows you to select temperature, minimum extraction and maximum extraction to optimally regulate your environment.

The 24 volt EC motor allows you to adjust the extraction speed and therefore save 30-40% energy compared to AC extractors.

Once the extractor is installed, you simply connect the corresponding filter to your growing area. Its high capacity activated carbon CTC80 ensures optimal protection for a long time.

The 9mm or 6mm Golf Filter is for use with 30 L & 47 L plastic reservoirs. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube.

Pythoff hydroponic nutrient conditioner Pythoff is an effective sterilising agent designed to ward off pests and disease in hydroponic systems. Once added to your nutrient solution, regular use of Pythoff will help protect your plants from a range of diseases, fungi, and parasitic organisms known to cause root-root, in particular Pythium. Pythoff will sterilise anything it comes into contact with which means all drippers, reservoirs, and surfaces in your hydroponic system will be sterilised and protected from pathogens that affect hydroponic systems. Highly recommend to all hydroponic growers as Pythoff can be used safely in all hydro systems.

Wind King Oscillating Wall Fan

This new Wall Fan is the new generation of wall fans coming to the hydroponic industry.

It is the upmost importance to ensure you have air mixed in your grow space to ensure any stale, damp, or CO2 air move around freely to help plants grow. Many growers complain about typical pedestal fans taking up too much room and not reaching the desired height needed, however this fan will mount to your wall saving you space and giving you the freedom to position it to any height needed.

The key reason growers are now switching to this fan is because of its new circular oscillating pattern. Usual oscillating wall fans will move side to side, however the Wind King will move in a ‘O’ shape making sure more air is being mixed in your grow space.

Benefits of using Wind King Oscillating Wall Fan:

16″ fan ensuring lost of air movement.

3 different speed settings.

Wall mounted – saving space.

5 blades for even better air movement.

Motor that is thermally protected.

Reliable and long lasting.

‘O’ shaped circular oscillation pattern meaning the air will mix above and below.

On and off oscillating feature.

How to use:

Ensure you put this product in a place where it is at a good height so it can treat the tops of the plants.

Using the mountings provided simply fix the Wind King to the wall and run power to it from a mains outlet socket.

Set your desired speed by turning the power switch. To turn your oscillation on and off simply pull the cord at the bottom.

Key Features:

Power: 120v, 60Hz

Max amps: 5A

FAN CONTROLLER (SYSTEMAIR)

18" (46cm) Metal Wall Fan

60W

3-Speed Settings

Oscillating

Aluminium Blades

1.5m Power Lead

The Can-Lite has been developed with ease of installation, durability and effectiveness in mind. The can-Lite is manufactured using the same proven packed bed design as the original Can-Filter but utilizes high quality virgin activated Australian RC light weight granular carbon. Airflows start at 150m3/hr and includes filters all the way up to an impressive 4500m3/hr. The recommended lifespan of these filters is 18 months depending on humidity and odour concentration in the room. The larger filters are a compact 1metre long so they do not take up precious room in your growing area and are light enough to hang from standard 48kg hangers.

Designed to fit our DUCTING FLANGE system, our range of extractors can also be used conventionally by adding two DF16100 connectors, 125 or 150mm.

The interface allows you to select temperature, minimum extraction and maximum extraction to optimally regulate your environment.

The 24 volt EC motor allows you to adjust the extraction speed and therefore save 30-40% energy compared to AC extractors.

Once the extractor is installed, you simply connect the corresponding filter to your growing area. Its high capacity activated carbon CTC80 ensures optimal protection for a long time.

RP.0409 - Irritec FLC Y-FILTER - 3/4" x 3/4" (Male/Male)