337 products
337 products
Sort by:
£23.95
Unit price per£23.95
Unit price perNew version with ball bearings
Use for stepping up or reducing down your duct size. Manufactured in galvanised steel. Rolled edges for extra strength (also maintains shape).
Use for stepping up or reducing down your duct size. Manufactured in galvanised steel. Rolled edges for extra strength (also maintains shape).
Compatible with all Secret Jardin tents
This clip fan is ideal for moving air without taking up needed space. It was designed for use in tents with poles measuring Ø16mm–30mm
Use for stepping up or reducing down your duct size. Manufactured in galvanised steel. Rolled edges for extra strength (also maintains shape).
Extractor Kit entry level fan/filter kit The Garden Highpro extractor kit comes in three sizes and is designed to be used as a budget ventilation kit for smaller tents. The fan is the garden highpro profan TT Max, the filter is a proactive carbon filter, lightweight and compact, it is made from coconut activated carbon and is matched to the air volume produces by the fan. The free-flowing design of the filters enables them to be fitted to the fans with very little change in flow rates. The complete kit comes in its own branded box and included inside is a fan, 5m aluminium ducting and two jubilee clips. Available in the following sizes: 100, 125 and 150mm.
Growing with CO2 enrichment is a proven method for boosting yields, improving quality, and accelerating growth.
By providing your plants with the optimal levels of carbon dioxide during the vegetative and flowering stages, you can harness the power of photosynthesis to achieve impressive results!
Introducing the brand new CO2 GRO Refill Packs!
Each Refill Pack Comes With:
-Part A
-Part B
-Instruction Manual
The Lighthouse 2kw Greenhouse Heater will Keep your greenhouse, grow room and grow tent temperatures under control. To grow successfully, you’re going to need to maintain a consistent environment. plants thrive at temperatures of around 25-28 degrees centigrade during the ‘lights on’ period and at 18 degrees in darkness. As winter approaches, maintaining these temperatures can become difficult without some form of supplementary heating, especially during hours when lighting is switched off. For this reason, we recommend the use of a this heater whenever readings drop below optimal levels. The greenhouse heater runs at a wattage of either 25w for fan only, 1000w for half heating power and 2000w for full heating and will heat a area of 20m2 with ease, with an air output of 186m2 per hour
For quick connection of spigotted fans to circular duct or accessories Galvanised steel circular duct clamp with foam lining
Extractor Kit entry level fan/filter kit The Garden Highpro extractor kit comes in three sizes and is designed to be used as a budget ventilation kit for smaller tents. The fan is the garden highpro profan TT Max, the filter is a proactive carbon filter, lightweight and compact, it is made from coconut activated carbon and is matched to the air volume produces by the fan. The free-flowing design of the filters enables them to be fitted to the fans with very little change in flow rates. The complete kit comes in its own branded box and included inside is a fan, 5m aluminium ducting and two jubilee clips. Available in the following sizes: 100, 125 and 150mm.
Use for stepping up or reducing down your duct size. Manufactured in galvanised steel. Rolled edges for extra strength (also maintains shape).
Use for stepping up or reducing down your duct size. Manufactured in galvanised steel. Rolled edges for extra strength (also maintains shape).
Spigot plate adaptors allow for the creation of a spigot connection onto a normal flat surfacewhether it is horizonal, verticle or angled. These adaptors can be secured by screw, rivet or nut and bolts onto any flat surface. They have a flat square backing with a round spigot for connection to flexible ducting or rigid spiral ducting .
Spigot plate adaptors allow for the creation of a spigot connection onto a normal flat surfacewhether it is horizonal, verticle or angled. These adaptors can be secured by screw, rivet or nut and bolts onto any flat surface. They have a flat square backing with a round spigot for connection to flexible ducting or rigid spiral ducting .
90 degree elbow bend. Manufactured in galvanised steel. Rolled edges for extra strength (also maintains shape).
90 degree elbow bend. Manufactured in galvanised steel. Rolled edges for extra strength (also maintains shape).
The Hylite Slimline 190W 1500mm Tubular Heater With Thermostat is the only tube heater on the market which can be used floor standing or wall mounted, and which features a patented built-in thermostat, which keeps energy usage to a minimum.
