Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.

AirBase Square will fit our 8.5 L / 2.2 gal and 15 L / 3.9 gal pots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.

Increase your plant's growth and yield potential with Autopot Clear Propogation Lid for 8.5ltr/15ltr Pots. This clear lid provides an optimal environment for your plants with improved ventilation and light penetration. Made with sturdy materials, it fits perfectly on Autopot pots of different sizes.

9mm or 6mm in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 L plastic reservoirs. This allows you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

Please note that this product is sold individually.

All AutoPot Watering Systems, Modules and Kits are now supplied with 9mm pipe and fittings suitable for AQUAvalve5.

9mm pipe features co-extruded construction and metre markings for ease of measuring.

9mm pipe has an outside diameter of 9mm and an internal diameter of 7mm. The composite and design of the pipe has been chosen to complement the AutoPot range and to ensure that easy connection is achieved and that water flow is at its maximum.

Please note that this listing is for a 30 metre roll of 9mm pipe 

The 9mm or 6mm Golf Filter is for use with 30 L & 47 L plastic reservoirs. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube.

The Autopot Lid for 1 Pot Tray is a must-have addition to your gardening setup. This lid is specifically designed for use with Autopot systems and ensures efficient use of water, nutrients, and space. Its innovative design promotes healthy plant growth and eliminates the need for manual watering. Upgrade your gardening game with this expertly crafted lid.

autopot Lid for 1 Pot Tray

Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.

AirBase Round will fit our 25 L / 6.6 gal pots and 20 L / 5 gal fabric FlexiPots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.

Efficiently install your Autopot system with the Autopot 16mm Top Hat Grommet, designed to work with a 19mm hole. Its precise fit ensures leak-proof connections, saving you time and water. No more messy installations - streamline your garden with ease.

Autopot 16mm Tophat Grommet PF919/16

30 metres of 16mm pipe.

16mm pipe is used for larger systems – typically any system of six pots or more (1Pot XL/XL SmartPot) and any system of eight pots or more (1Pot/easy2grow).

16mm-9mm or 16-6mm fittings are used to reduce the pipe to connect to the AQUAvalves

Our new, blue, co-extruded 16mm pipe is metre marked for durability and ease of cutting.

The AutoPot SmartPot System combines our power-free, water efficient, low maintenance, modular systems with high performance fabric pots for the first time. SmartPots stimulate plant growth by aerating, feeding and guiding the root structure rather than merely containing it.

The porous BPA-free, lead-free SmartPot material allows improved gas exchange in the substrate. Free to breathe the root zone can see dramatically enhanced oxygen levels – supercharging growth.

When root tips reach the porous side of a SmartPot they are ‘air-pruned’ – detered from extending any further by the air outside. Secondary roots then develop, creating a fibrous root structure with vastly improved moisture and nutrient uptake. Root circling is also thus eliminated making it possible to produce bigger plants from smaller pots.

Extremely durable and reusable the SmartPots are easily cleaned betwen uses if desired. Once emptied the SmartPots are best left to dry. After a few days any dust and small roots are easily brushed off. Whilst this level of cleaning is completely sufficient the SmartPot may be machine or tub washed in peroxide in order to sterilize. Do not put SmartPots in a tumble dryer.

A SmartPot XL System contains all you need to set up an automated watering system with fabric pots. The compact size and portability that SmartPot brings to XL means jaw-dropping reductions in shipping costs and much easier storage for stores and growers alike.

As with all of our systems the SmartPot System is easily extended so many pots can be linked to a single reservoir. The pots and trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up with a water and nutrient filled reservoir this extremely versatile, gravity-fed system will run automatically. It will completely take care of all your plants needs without the need for pumps, timers or intensive maintenance.

When growing in AutoPot Watering Systems it is essential that a PotSock Round (PotSock included) be fitted to the base of each SmartPot to provide root control.

Please note: Room humidity may be increased when growing with multiple SmartPots indoors due to the exposed, porous surface of the fabric pots.

Pro Filter introduces growers everywhere to the levels of adjustability and customisation favoured by commercial facilities. Different filter inserts can be used providing the grower with different micron options depending on their growing demands. Whilst professional growers demand precision they also require products that are durable, reliable and easy to maintain. Pro Filter was designed with these qualities in mind. The filter has a larger, drum-shaped filter area and a higher micron element for added protection against blockages. Its larger size makes dismantling and cleaning simple. Click Fit ProFilter includes click fittings to allow easy connection to standard hose connections and the FlexiTank tap.

The Autopot 16mm In-line Filter is a must-have for any hydroponic or irrigation system. With its 16mm diameter, it effectively removes debris and impurities, ensuring clean and efficient water flow. Equipped with high-quality filters, it improves the overall health and growth of plants. Enhance your system with this reliable and durable filter.

Autopot 16mm In-line Filter PF918/16

Use Module Accessory Packs to upgrade your system to AQUAvalve5 with 9mm and 16-9mm pipe and fittings. An AQUAvalve5 Module Accessory Pack will fit into in your existing module trays perfectly. It includes all the fittings you need to connect to 16mm pipe – even 16-9mm cross and tee connectors.

If connecting directly to the reservoir using 9mm pipe you may also require the new 9mm Top Hat Grommet and 9mm Golf Filter or, if your reservoir has a 16mm outlet, the new 16-9mm click-fit adapter and filter.

Alternatively you can maintain older systems in tip-top condition with 6m and 16-6mm pipe and fittings using a 6mm AQUAvalve Module Accessory Pack.

The 6 Pot XL System is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The 6 Pot XL System is easily extended so many pots can be linked to a single tank. Please see examples of typical layouts using 9mm pipe or 16mm pipe. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

All you need to do is remember to fill up your tank from time to time.

AutoPot easy2progagate propagation made easy easy2Propagate is the largest, most adjustable single piece propagation lid on the market. It’s size and ventilation capacity mean a vast range of climatic options are achievable. easy2Propagate’s size and features deliver entirely new levels of growing potential and plant control. A cavernous 200mm lid height offers your plants more headroom than any other single piece propagator lid available, giving you greater choice as to when you transplant. Four large and fully adjustable vents allow growers unparalleled scope to fine-tune an environment in which young plants can thrive. easy2Propagate ties together the proven growing technology of the AutoPot range. Fitted with four 6mm piping ports, it is designed to accommodate an AQUAvalve for easy integration with low maintenance AutoPot Watering Systems. The lid and kit contents slot together in minutes.

The Autopot 6mm End Stop is a Pack of 10 that will effectively prevent any accidental spillage or leakage of your hydroponic system. Made with high-quality materials, these end stops are durable and reliable, ensuring the smooth functioning of your Autopot system.

Efficiently connect your Autopot system with the Autopot 16mm-6mm Tee Connector. Designed for easy installation, this connector ensures a strong and secure connection for optimal performance. Made with durable materials, it is built to last and enhance the effectiveness of your Autopot system.

This Autopot 16mm-6mm Tee is designed to connect tubing with 16mm and 6mm diameters. Made from high-quality materials, it ensures a secure and leak-proof connection for efficient irrigation. Save time and effort with this professional-grade tee.