143 products
143 products
Sort by:
All AutoPot Watering Systems, Modules and Kits are now supplied with 9mm pipe and fittings suitable for AQUAvalve5.
9mm pipe features co-extruded construction and metre markings for ease of measuring.
9mm pipe has an outside diameter of 9mm and an internal diameter of 7mm. The composite and design of the pipe has been chosen to complement the AutoPot range and to ensure that easy connection is achieved and that water flow is at its maximum.
Please note that this listing is for a 30 metre roll of 9mm pipe
Efficiently install your Autopot system with the Autopot 16mm Top Hat Grommet, designed to work with a 19mm hole. Its precise fit ensures leak-proof connections, saving you time and water. No more messy installations - streamline your garden with ease.
Autopot 16mm Tophat Grommet PF919/16
9mm or 6mm in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 L plastic reservoirs. This allows you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
Please note that this product is sold individually.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Round will fit our 25 L / 6.6 gal pots and 20 L / 5 gal fabric FlexiPots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
Pro Filter introduces growers everywhere to the levels of adjustability and customisation favoured by commercial facilities. Different filter inserts can be used providing the grower with different micron options depending on their growing demands. Whilst professional growers demand precision they also require products that are durable, reliable and easy to maintain. Pro Filter was designed with these qualities in mind. The filter has a larger, drum-shaped filter area and a higher micron element for added protection against blockages. Its larger size makes dismantling and cleaning simple. Click Fit ProFilter includes click fittings to allow easy connection to standard hose connections and the FlexiTank tap.
30 metres of 16mm pipe.
16mm pipe is used for larger systems – typically any system of six pots or more (1Pot XL/XL SmartPot) and any system of eight pots or more (1Pot/easy2grow).
16mm-9mm or 16-6mm fittings are used to reduce the pipe to connect to the AQUAvalves
Our new, blue, co-extruded 16mm pipe is metre marked for durability and ease of cutting.
The Autopot 16mm In-line Filter is a must-have for any hydroponic or irrigation system. With its 16mm diameter, it effectively removes debris and impurities, ensuring clean and efficient water flow. Equipped with high-quality filters, it improves the overall health and growth of plants. Enhance your system with this reliable and durable filter.
Autopot 16mm In-line Filter PF918/16
The 6 Pot XL System is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.
The 6 Pot XL System is easily extended so many pots can be linked to a single tank. Please see examples of typical layouts using 9mm pipe or 16mm pipe. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.
All you need to do is remember to fill up your tank from time to time.
The Autopot Lid for 1 Pot Tray is a must-have addition to your gardening setup. This lid is specifically designed for use with Autopot systems and ensures efficient use of water, nutrients, and space. Its innovative design promotes healthy plant growth and eliminates the need for manual watering. Upgrade your gardening game with this expertly crafted lid.
autopot Lid for 1 Pot Tray
Increase your plant's growth and yield potential with Autopot Clear Propogation Lid for 8.5ltr/15ltr Pots. This clear lid provides an optimal environment for your plants with improved ventilation and light penetration. Made with sturdy materials, it fits perfectly on Autopot pots of different sizes.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Square will fit our 8.5 L / 2.2 gal and 15 L / 3.9 gal pots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
The Autopot 6mm End Stop is a Pack of 10 that will effectively prevent any accidental spillage or leakage of your hydroponic system. Made with high-quality materials, these end stops are durable and reliable, ensuring the smooth functioning of your Autopot system.
This Autopot 16mm-6mm Tee is designed to connect tubing with 16mm and 6mm diameters. Made from high-quality materials, it ensures a secure and leak-proof connection for efficient irrigation. Save time and effort with this professional-grade tee.
Top Hat Grommets provide a water tight connection using 9mm or 6mm pipe with the 30 & 47 L plastic reservoirs.
The Top Hat Grommet is positioned at the bottom of the reservoir. All AutoPot 30 & 47 L plastic reservoirs are now supplied drilled and with 9mm Top Hat Grommets.
If fitting a 9mm grommet (for AQUAvalve5) to an existing/non-AutoPot plastic reservoir drill out to 12.5mm diameter.
If fitting a 6mm grommet (for older, pre Aug 2020 AQUAvalves) to an existing/non-AutoPot plastic reservoir drill out to 10mm diameter.
The grommet is then inserted into the hole and a length of 9mm or 6mm pipe (according to the grommet used) is then pushed through the grommet. Push the pipe all the way through the grommet so that you can see the tube protruding inside the reservoir.
The 9mm or 6mm Golf Filter is for use with 30 L & 47 L plastic reservoirs. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube.
The AQUAvalve is supplied with all the AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used allowing the plant to go through a wet & dry cycle. Once all the water has been used by the plants the AQUAvalve will re-open and refill the tray. The AQUAvalve is a simple but very effective watering device and needs to be treated with care. Keep the AQUAvalve and the tray it sits in clean, free of obstructions, soil particles and it will help you water & feed your plants for many years. The AQUAvalve is guaranteed for 12 months.
Choose 16-9mm for AQUAvalve5 and 9mm Fittings
The Click Fit Adapter and Filter is designed to be used with all sizes of FlexiTank and FlexiTank Pro. It is simply pushed onto the tap provided. It has a 13mm filter incorporated along its length to filter the water before it travels along the pipes. The fitting allows the user to push 9mm or 6mm pipe (depending on model of filter selected) onto the end of the adapter.
Tray2Grow is the completely automated, completely power-free system that offers you five ways to feed and water your plants. Seed trays, small pots, grow bags, micro herbs, and planters, can each be accommodated, making this the most versatile product in the AutoPot range and one of the most versatile irrigation systems period.
Equipped for every eventuality, Tray2Grow includes optional capillary spikes that can be fitted to the inside of the tray. These pierce the underside of a grow bag, allowing you to irrigate the substrate within.
With the spikes removed and capillary matting in place Tray2Grow can take up to four standard sized seed trays, two micro herb trays, any number of bottom-perforated or bio pots, or our capacious 107.5 L / 23.5 gal framed fabric planter. Three guide holes on each side of the tray are provided for garden canes if you’re trellising plants and there are three inset spirit levels to help you ensure everything is 100% horizontal.
