PotSocks have been designed to keep even the most agile root system where it belongs… contained in the pot! Enjoy complete peace of mind that your AQUAvalve is safe and free from rogue roots. PotSocks are great for growers cultivating long term crops or simply plants with a very aggressive root system. Available in square or round variations, to fit the easy2grow, 1Pot or XL pots. They’re also the ideal solution for growers using fabric air pruning pots in an AutoPot system.

Grow what you want, when you want, whilst still enjoying the incredible space and maintenance saving benefits of a tray system. Auto8 15ltr comes complete with eight 15ltr square pots but can also house the 8.5ltr variety – available separately. You can interchange at will – no adjustment to the tray is required.

You can cultivate plants at various stages of development in the same tray system. Swap plants in and out with ease as needed. Minimise repotting and the risk of transplant shock.

The principles of Auto9 XL also apply to Auto8. Multiple pots are irrigated in a single tray and lid assembly by a single AQUAvalve5. Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.

Auto8 15ltr is supplied with eight 15ltr solid pots.

Cultivating with Auto8 benefits growers in three key areas:

Growing Space

Maximises the available area

Ideal for moveable racks and rolling tables

Overheads

Draws no more water than 8 single 1Pot trays

Reduction in components = reduced maintenance duties

Plant Health

Unlike a large, single, flat tray the moulded base minimises standing water

Lid blocks light and debris from entering the tray

Minimum Reservoir Requirements

1x Auto8 – FlexiTank / FlexiTank Pro 100ltr

2x Auto8 – FlexiTank / FlexiTank Pro 225ltr

4x Auto8 – FlexiTank / FlexiTank Pro 400ltr

8x Auto8 – FlexiTank 750ltr

10x Auto8 – FlexiTank 1000ltr

6mm in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 ltr tanks. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

Developed by AutoPot to meet the demands of the ambitious gardener, featuring an immense 25 litre growing capacity the 1Pot XL is perfect for growers looking to cultivate BIG plants and achieve even BIGGER yields. This original design has a clam shaped tray that accommodates the large volume 25 litre XL pot. The round based pot enables the grower to easily rotate a big plant while the pot is still in the tray. Ideal for large specimen plants, such as Blueberry bushes or Japanese Maples, the 1Pot XL can be used as a single unit system or linked to larger reservoirs to create huge systems of any size or configuration. The 1Pot XL is supplied with all necessary connections and the AQUAvalves that control the water supply to each and every plant in the system, delivering fresh, balanced feed throughout their entire life cycle.

A replacement easy2grow (2Pot) Tray and Lid as supplied with AutoPot easy2grow modules and systems. The easy2grow Tray and Lid accepts two 8.5ltr or two 15ltr Square Pots (pots not included). The Tray and Lid may also be used with one or two AQUAplate Square Kits. The tray requires an AQUAvalve and fittings (not included) to function as part of an AutoPot Watering System. We recommend using PotSock Squares (not included) on the bases of your pots to prevent your plant’s roots from impairing the performance of the AQUAvalve

Efficiently connect your Autopot system with the Autopot 16mm-6mm Tee Connector. Designed for easy installation, this connector ensures a strong and secure connection for optimal performance. Made with durable materials, it is built to last and enhance the effectiveness of your Autopot system.

Maximize your Autopot system's efficiency with the Autopot 16mm Tee Connector - (C). This durable connector allows for easy attachment of additional pots and save up to 50% of water usage. Upgrade your gardening game today.

Autopot 16mm Tee Conector PF914/16

Maximize water efficiency and control the flow of your irrigation system with the Autopot 16mm In-line Tap. With its easy-to-use design, this tap allows you to adjust water flow to specific plants or sections, ensuring targeted watering and preventing water waste. A must-have for expert gardeners and efficient irrigation systems.

Autopot 16mm In-line Tap PF916/16

The Autopot 16mm End Stop is designed to provide a secure and leak-proof connection for your Autopot irrigation system. With its 16mm size, it ensures compatibility with most hoses and pipes. This end stop allows for hassle-free installation and ensures optimal water flow, making it an essential accessory for your gardening needs.

Autopot 16mm End Stop PF915/16

A replacement 15ltr square pot to fit AutoPot easy2grow and 1Pot modules and systems. We recommend fitting PotSock Square to the base of 15ltr Pots for superior root control.

Efficiently monitor and control your plant’s environment with the TrolMaster AquaX Control Sensor. This 3-in-1 sensor measures EC, temperature, and moisture levels, providing essential data for optimal plant growth. With its precision and reliability, you can ensure the perfect conditions for your plants to thrive.

The TrolMaster AquaX 24V Control Board is an industry-leading solution for precise and efficient control of your hydroponic system. With its advanced technology and 24V compatibility, this control board ensures maximum performance for your plants, resulting in higher yields and healthier crops. Trust in the expertise of TrolMaster to optimize your growing experience.

8-Pack- Classic “plug n play” 8-bucket system The WaterFarm 8-pack is eight WaterFarm module units connected to one General Hydroponics Controller- an integrated 13 gallon reservoir and an 8 gallon controller unit. The controller will keep each unit topped off with the correct level of nutrient for low maintenance. The WaterFarm 8-Pack is powered by GH’s Dual Diaphragm Air Pump and includes necessary hardware and Flora Series nutrients. The grower can arrange the WaterFarm units in a design that is suitable for any environment. Pack them tight or space them out for your growing situation. The WaterFarm 8-Pack is the system for big growers. Clay pebbles not included. You’ll need about 70 liters of hydroton/clay pebbles to fill a WaterFarm 8-Pack. This complete system includes: 8-WaterFarm modules 8-gallon controller 13-gallon reservoir Blue tubing & fittings Air line & fittings Dual diaphragm air pump 3-part Flora Kit Circulating Upgrade Kit Have an older WaterFarm 8-pack? This kit contains everything needed to reconfigure a WaterFarm 8-Pack and add nutrient circulation capability to a unit manufactured prior to 2009. This promotes even growth and more consistent results overall.

GHE The AquaFarm® & WaterFarm® easy to use hydroponics for everyone The ORIGINAL home hydroponics unit. Often copied, never equalled. Invented more than 30 years ago in California by GH USA founder Lawrence Brooke, and still GHE’s best-selling home hydroponic system today, the Aquafarm®, and smaller format Waterfarm, have grown hundreds of thousands of healthy, happy and often huge plants around the world. The Aquafarm® owes its longevity and success to the mix of performance and ease of use that the system offers. Quick to set up in any space from greenhouses to kitchens and balconies, Aquafarms® and Waterfarms® can be used to grow decorative and culinary plants of all sizes, from basil and other herbs to small trees. Both systems work by using air to draw nutrient solution up from the reservoir, and dripping it back down through the clay pebble substrate and roots. This simple, reliable design is incredibly effective at delivering perfectly oxygenated nutrient solution to plants - exactly what’s needed for optimal growth and flowering, and two-part construction offers easy reservoir and root access, which can be difficult or impossible in many systems. Now in version 3, boasting a range of improvements to component design, the AquaFarm® and WaterFarm® are: • Roto-moulded in France from super tough and durable recycled plastic • Versatile, adaptable and expandable • UV and light shielded for root protection • Very low electricity consumption: less than 2w

The T.A. Rainforest Motor 12 Volts (GHE) is a high-performance motor designed for optimal efficiency and durability. With a powerful 12-volt capacity, it provides reliable and consistent power for a variety of applications. Experience the benefits of seamless performance and long-lasting reliability with this expertly crafted motor.

GHE The AquaFarm® & WaterFarm® easy to use hydroponics for everyone The ORIGINAL home hydroponics unit. Often copied, never equalled. Invented more than 30 years ago in California by GH USA founder Lawrence Brooke, and still GHE’s best-selling home hydroponic system today, the Aquafarm®, and smaller format Waterfarm, have grown hundreds of thousands of healthy, happy and often huge plants around the world. The Aquafarm® owes its longevity and success to the mix of performance and ease of use that the system offers. Quick to set up in any space from greenhouses to kitchens and balconies, Aquafarms® and Waterfarms® can be used to grow decorative and culinary plants of all sizes, from basil and other herbs to small trees. Both systems work by using air to draw nutrient solution up from the reservoir, and dripping it back down through the clay pebble substrate and roots. This simple, reliable design is incredibly effective at delivering perfectly oxygenated nutrient solution to plants - exactly what’s needed for optimal growth and flowering, and two-part construction offers easy reservoir and root access, which can be difficult or impossible in many systems. Now in version 3, boasting a range of improvements to component design, the AquaFarm® and WaterFarm® are: • Roto-moulded in France from super tough and durable recycled plastic • Versatile, adaptable and expandable • UV and light shielded for root protection • Very low electricity consumption: less than 2w

Eye Dropper Bottle Complete

Bloomroom Flexi Rez Catchment Trays

Introducing the new Bloomroom Flexi Rez Catchment Trays. The trays come flat packed for easy storage and transport. This feature also ensures easier installation. The Flexi Rez catchment trays are the perfect insurance policy for any irrigation systems. They are also superb for the home growing enthusiast who may have limited access to their growroom. The trays where designed to fit where no trays have been able to fit before and are mail order friendly. The Flexi-mat is made of incredibly resilient waterproof material that is also flexible, and easy to construct. It’s so straightforward that it can assembled in a matter of minutes! This hard-wearing design can stop any leaks from spilling out of your reservoir, allowing for a hassle-free clean-up and also has a handy tap to drain out every last drop of spillage. It comes complete with a sturdy water catchment tray, legs and feet. It is the ideal solution to a lot of grow room/reservoir leak worries, and is perfect for people using hydroponic systems with large reservoirs such as Wilma, Autopot, Multiflow and others. The flexi trays come flat packed which makes them super easy, quick and simple to set up.