Maxibright Propagation LED Strips (2 x 30W)

Propagation 6500K 100cm LED strips from Maxibright, a perfect replacement for traditional T5 fluorescent lamps. Energy efficient, and last 50'000 hours. Pack of 2.

• 2 x 30W Propagation LED strips
• 6500K colour temperature
• 66 μmol/s total light output (PPF) per strip
• High quality MaxiLED chips
• IP65 Ingress protection
• Daisy chain up to 50 strips
• Energy efficient
• Low heat output
• No fans or moving parts, silent running
• Easy one person set up
• 50’000 hour lifespan
• 1.5m power lead, plug and play
• 2 year warranty
• Dimensions: 1000 x 34 x 34mm

Maxibright Propagation LED Strips (2 x 26W)

Propagation 6500K 55cm LED strips from Maxibright, a perfect replacement for traditional T5 fluorescent lamps. Energy efficient, and last 50'000 hours. Pack of 2.

• 2 x 26W Propagation LED strips

• 6500K colour temperature

• 57 μmol/s total light output (PPF) per strip

• High quality MaxiLED chips

• IP65 Ingress protection

• Daisy chain up to 50 strips

• Energy efficient

• Low heat output

• No fans or moving parts, silent running

• Easy one person set up

• 50’000 hour lifespan

• 1.5m power lead, plug and play

• 2 year warranty

• Dimensions: 550 x 34 x 34mm

Maxibright T5 LED Propagation Light: 60cm (2ft) 4 Tube

Experience healthier seedlings, thriving plants, and robust growth with Maxibright T5 LED lighting fixtures. With a 6500K colour temperature, mimicking natural sunlight, and a highly reflective aluminium reflector ensuring superior light quality, and uniform distribution. Creating an ideal growing environment with minimal heat output.

Save up to 50% on energy costs compared to traditional T5 fluorescent tubes, Our T5 LED fixtures are eco-friendly and cost-effective, with a prolonged lifespan for year-round benefits.

Easy installation with 2 x hanging points allows flexible setup - either horizontally or vertically - giving your indoor garden the personal touch it deserves.

• Supplied with 4 x 21W T5 LED Lamps
• PPF: 159 μmol/s
• Colour Temperature: 6500K
• 2 x hanging points (hang horizontally or vertically)
• 3.1m power cable

Maxibright T5 LED Propagation Light: 60cm (2ft) 2 Tube

Experience healthier seedlings, thriving plants, and robust growth with Maxibright T5 LED lighting fixtures. With a 6500K colour temperature, mimicking natural sunlight, and a highly reflective aluminium reflector ensuring superior light quality, and uniform distribution. Creating an ideal growing environment with minimal heat output.

Save up to 50% on energy costs compared to traditional T5 fluorescent tubes, Our T5 LED fixtures are eco-friendly and cost-effective, with a prolonged lifespan for year round benefits.

Easy installation with 2 x hanging points allows flexible setup - either horizontally or vertically - giving your indoor garden the personal touch it deserves.

• Supplied with 2 x 21W T5 LED Lamps
• PPF: 81 μmol/s
• Colour Temperature: 6500K
• 2 x hanging points (hang horizontally or vertically)
• 3.1m power cable

Maxibright T5 LED Propagation Light: 120cm (4ft) 8 Tube

Experience healthier seedlings, thriving plants, and robust growth with Maxibright T5 LED lighting fixtures. With a 6500K colour temperature, mimicking natural sunlight, and a highly reflective aluminium reflector ensuring superior light quality, and uniform distribution. Creating an ideal growing environment with minimal heat output.

Save up to 50% on energy costs compared to traditional T5 fluorescent tubes, Our T5 LED fixtures are eco-friendly and cost-effective, with a prolonged lifespan for year-round benefits.

Easy installation with 2 x hanging points allows flexible setup - either horizontally or vertically - giving your indoor garden the personal touch it deserves.

• Supplied with 8 x 41W T5 LED Lamps
• PPF: 534 μmol/s
• Colour Temperature: 6500K
• 2 x hanging points (hang horizontally or vertically)
• 3.1m power cable

Maxibright Juno Pro Signal Cable (LED to LED) 5M

24 hour on off timer

Controls the maxibright juno led pro fixtures

Dimming range in 1% increase 20% - 100%

Sunset and sunrise setings 0-130 min​​​​​​​​​​​​​​

Two independant controlled zones

Controls up to 200 led fixturres

​​​​​​Max leds per zone of 100

Thermostatically controlled dimming

The JUNO LED PRO 1800 is an affordable yet incredibly powerful LED fixture from Maxibright which boasts a high total light output of 1800 μmol/s (PPF) of uniform, full spectrum light with added red for enhanced flowering. Featuring 6 bars of high quality MaxiLED chips, optimised to perfectly cover a 1.5 x 1.5m area.

Foldable for easy transport and installation. Including a remote dimmer, and the option to control multiple units using the JUNO LED lighting controller for ultimate control over your grow light. This LED fixture offers the same uncompromising level of quality and performance that you would expect from all Maxibright products.

PPF: 1800 μmol/s

Power: 720W

6 bar system, foldable

Ideal over a 1.5 x 1.5m area

Dimensions: 1130 x 1100 x 40mm

High quality MaxiLED chips

Includes remote dimmer

25% - 50% - 75% - 100% power

Enhanced flowering with added red light

Outstanding uniform light coverage

Energy efficient, low heat output

No fans or moving parts, silent running

Easy one person set up

50’000 hour lifespan

4m power lead, plug and play

Control multiple units with link cables

To connect the 660W and 480W LED Lighting Systems and DAYLIGHT Lighting Controller (Excluding DAYLIGHT 660W LED (2019)).

For use with 660W and 480W LED Lighting Systems (Excluding DAYLIGHT 660W LED (2019)). Link up to 100 LED units with ease, and control via the DAYLIGHT Lighting Controller.

More flower, less power

The DAYLIGHT 100W LED with dimmer, is a full spectrum

stand-alone unit perfect as a supplemental light for an

existing LED fixture, or even amongst traditional HID setups. Its slim-line design and external LED driver make for

easy hanging even in smaller grow spaces. With a huge total

output (PPF) of 280 µmol/s it will help to boost the yield of

almost any crop.

DAYLIGHT LIGHTING CONTROLLER

Precise and versatile lighting control, right at your fingertips! The new DAYLIGHT Lighting Controller has been designed and manufactured to power your grow lights, whether you are using CMH or LED technology. Whether you want functionality like sunrise/sunset options, dimming on overheat or simply need to control the times of banks of lights with ease, this unit has you covered. Connected via the iLink ports, you can daisy chain multiple lighting fixtures together and control them all from the one unit, with the simple touch of a few buttons. Things couldn’t be made simpler for you!

• Two zones (A & B) controlled independently 

• Control for 400 HID ballasts or 100 LED drivers 

• Max HID ballasts per zone: 200 

• Max LEDs per zone: 50

On/Off 24hr timer

Controls: DAYLIGHT iLink ballast for 315W CMH, 480W, 660W and 1030W LED

Dimming range (1% increments) LED – 20%-100% HID – 50%-100%

Sunset and sunrise settings: 0-30 mins

Temperature safety control

Thermostatically controlled dimming

DAYLIGHT 60W Far Red LED

This single 60W Far Red DAYLIGHT LED bar is a slim-line, stand-alone unit, which makes for an easy installation as a supplemental light to an existing LED fixture. With an efficiency of 2.3 μmol/J and a total output of 138 μmol/s, it will help to fine-tune the spectrum of any setup.

Overall fixture efficiency: 2.3 μmol/J

Total output: 138 μmol/s

Osram LED red chips

Attach to DAYLIGHT LED lighting fixtures (480W/660W) or use independently

Internal LED driver: Plug and Play

Ideal as supplementary lighting

IP65 Ingress Protection

Extend standard LED power cable to 9m. For use with 660W and 480W LED Lighting Systems. (Excluding DAYLIGHT 660W LED (2019)).

Introducing the DAYLIGHT 660W LED PRO, our ‘Flagship’ high output LED lighting fixture. With a blisteringly high total output (PPF) of 1848 μmol/s this unit pushes LED grow lighting to the next level. It’s 6 bars of high-efficiency Osram and LUMLED LED chips cover a 1.5m x 1.5m area perfectly, with outstandingly uniform light coverage. In addition to its new lightweight and slimline design, the 660W PRO has new and improved clip on bars making one person assembly a breeze.

iLink compatible, for use with the DAYLIGHT Lighting Controller

The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit down to 25% power, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.

DAYLIGHT 660W LED (2020)

Introducing our new and improved DAYLIGHT 660W LED lighting fixture. Our new 660W LED features the same outputs that made the original our most successful and popular unit; what sets it apart is the brand new design of the fixture and the host of new features that come along with it! With a PPF of 1518 μmol/s and a fixture efficiency of 2.3 μmol/J, you can expect the same exceptional quality of light and improved yield as the original. It’s 6 bars of high-efficiency Osram and Lumileds LED chips cover a 1.5m x 1.5m area perfectly, with outstandingly uniform light coverage. The new lightweight and slimline design improves on the already beautifully simple assembly of the original 660W LED fixture. New and improved clips to easily attach your bars make fumbling around in your grow room with bulky lighting a thing of the past!

The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather.

Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.

• Total output: 1518 μmol/s. Overall fixture efficiency: 2.3 μmol/J

• Lumileds white (2.6 μmol/J) and Osram red (3.15 μmol/J) chips: The best of the best.

• 6 bar system – Gives highly uniform coverage (PPFD) across the canopy. Ideal over a 1.5m x 1.5m area.

• Full spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.

• Silent running: No fans or moving parts.

Product Dimensions: 1119.6 x 1066 x 71.1mm

DAYLIGHT 480W LED PRO

DAYLIGHT 480W LED Grow Lights ensure growing with LED’s will impress even the most staunch HPS supporter.

Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 480W LED PRO, for growers looking for higher outputs and greater yields in a more compact and versatile unit. This fixture boldly bridges the gap between the higher and lower powered units in the range, meaning they’re adaptable to a wide range of applications such as propagation, multi-layer gardening and grow tents/rooms. The ability to dim the fixture from 25% up to 100% power, means you can use it from the early stages of growth right through to flowering.

Don’t let the fact that these LEDs sit in the middle of our range fool you, the DAYLIGHT 480W LED PRO boasts a full spectrum of light with a fixture efficiency of 2.8 μmol/J and a total output of 1344 μmol/s. This is all made possible by 5 bars of high-quality Osram and LUMLED LED chips, covering a 1.2m x 1.2m area perfectly, with outstandingly uniform light coverage. All of this bundled up into a slimline and lightweight design. In addition to its new slimline design, the DAYLIGHT 480W LED PRO has new and improved clip-on bars, making one person assembly a breeze.

iLink compatible, for use with the DAYLIGHT Lighting Controller

The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.

DAYLIGHT 480W LED

Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 480W LED. These fixtures boldly bridge the gap between the higher and lower powered units in the range, meaning they’re adaptable to a wide range of applications such as propagation, multi-layer gardening and grow tents/rooms. The ability to dim the fixture from 25% up to 100% power, means you can use it from the early stages of growth right through to flowering.

The DAYLIGHT 480W LED boasts a full spectrum of light with a fixture efficiency of 2.3 μmol/J and a total output of 1104 μmol/s. This is all made possible by 5 bars of high-quality Osram and Lumileds LED chips, covering a 1.2m x 1.2m area perfectly, with outstandingly uniform light coverage. All of this bundled up into a slimline and lightweight design. In addition to its new slimline design, the DAYLIGHT 480W LED has new and improved clip-on bars, making one person assembly a breeze.

iLink compatible: Designed to use with the DAYLIGHT Lighting Controller

The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.