255 products
255 products
Sort by:
The Secret Jardin Cosmorrow 100W BLOOMING Kit also called Full Spectrum Light is a compact, robust and waterproof 24 volt LED lamp designed mainly for the flowering phase. The LED lamp emits a warm white light and has 4 different light colours, line 1 - 2700 K, line 2 - 4000 K, line 3 - 6500 K, line 4 - 660 nm (deep red). In addition, the Cosmorrow Bloom LED has a blue peak at 440nm and is therefore also suitable for propagating cuttings and for the growth phase. Thanks to the optimally coordinated colour spectrum, your plants will be well cared for right from the start.
The Cosmorrow LED lamp is flexible and can be used as additional lighting to brighten up every corner of your grow box. The Cosmorrow LED can also be used as the main lighting for smaller grow tents. There are no limits to the installation, you can screw, clamp or hang the Cosmorrow LED either horizontally or vertically to save space. The manufacturer recommends a distance of 15 to 35 cm to the plants.
Technical data:
PPF value: 240 µmol/s
PPFD value: 2.4 µmol/s/w
optimal grow surface 60x60 cm
Dimensions (LxWxH): 500mm x 400mm x 65mm (single LED)
Consumption: 100 W
Voltage: 24 V
Current: 0.83 A
Light colour: Line 1 - 2700 K, Line 2 - 4000 K, Line 3 - 6500 K, Line 4 - 660 nm
Light output: 2400 lumen
Working temp. T° : 0°C to 40°C
Storage T° : -20°C to 60°C
Connection: 24V plug IEC
Lifetime: 50,000 hours
Weight: 0,95 kg
Protection class: IP65
Scope of delivery:
1x COM5X20 lampholder incl. power supply unit
5x Cosmorrow Bloom LED 20W (COP20BL)
The SANlight Q1W LED module has been designed for the home and hobby sector. It offers maximum flexibility, especially for smaller areas of plant cultivation. The combination of high-quality light sources, and matching supply electronics , guarantee a high light output with a long service life and high energy efficiency. Passive cooling increases the reliability and there is no operating noise.
A universally applicable light spectrum enables both the raising of young plants and seedlings as well as the successful cultivation of ornamental, flowering and fruit-bearing plants.
125 µmol/s PPF*
Broadband full spectrum
50W Power Draw
90° Beam Angle
Modul-Efficiency > 2,7µmol/J
3 Years Full Warranty
90% Light-Output after 100.000h of operating
Compact Luminaire
Passive and soundless cooling
Protection class IP40
Sanlight Wieland Distribution Block
Sanlight Wieland Closure Piece for Femlae Parts
Sanlight Grid Power Cord Q-Series (Gen 2 UK)
SANlight Flex Compact and flexible linear light The SANlight FLEX series is a compact and powerful LED illumination solution for use in multi-layer systems, Interlighting applications and as an additional light to existing luminaires. The light spectrum of the SANlight FLEX series specially developed for these applications is extraordinarily broadband and has a balanced far-red/red ratio. This accelerates rooting for cuttings and greatly promotes growth in the first phase of plant life. The generously dimensioned passive cooling system keeps the light cool when in operation. In combination with the high IP68 protection rating, this allows the use of the SANlight FLEX between the plants where there is no light. This means the quantity and quality of your harvest is greatly improved. When used in multi-layer systems, the broad and homogeneous wide beam characteristics ensure perfect light distribution, even when there are small distances between the light source and the tip of the plant. In addition, the low installation height reduces the space requirement of the individual layers. In order to keep the installation simple even in larger systems, several luminaires can be supplied via a common LED driver. The luminaires can be connected directly to one another without tools or with the available connecting cable. The mounting tab can also be folded for easy mounting. Thus the SANlight FLEX offers an extremely flexible system for young plant breeding, and Interlighting applications. SANlight Flex 10 36449 Flex 20 36450 • Available in two different lengths • Compact space-saving design • Cool operating temperature • Broadband light spectrum with balanced far-red/red ratio • Operation of several lights with a LED driver • Waterproof IP68 • Homogeneous wide beam characteristic 90° • Rectangular distribution of light
Sanlight Flex Power Supply - 60w (2x30w 3x20w 6x10w)
Sanlight Flex 2 Pin Waterproof Connection Cable
The SANlight FLEX II series is a compact and powerful LED lighting solution with a wide range of applications: from multilayer applications, as interlight, for rooting plants to as a lighting solution for indoor plants.
The revised light spectrum of the SANlight FLEX II series is exceptionally broadband and has a balanced FarRed/Red ratio. This not only accelerates rooting in cuttings, it also strongly promotes growth in the first phase of plant life. In addition, it can also be used very well for lighting a wide variety of indoor plants.
Due to the generously designed passive cooling, the luminaire remains cool even during operation. In combination with the high IP68 protection rating, this allows the SANlight FLEX II to be used between plants where no light would otherwise reach. This greatly improves the quantity and quality of your harvest.
Used in multilayer systems, the wide and homogeneous radiation characteristic ensures perfect light distribution, even with small distances between light source and plant tip. In addition, the small overall height reduces the space required for the individual tiers. To keep installation simple even in larger systems, several luminaires can be supplied via a common LED driver. The luminaires can be connected directly to each other with the available connecting cable without tools. The mounting bracket can also be moved for convenient installation.
This makes the SANlight FLEX II an extremely flexible system for any application such as seedling cultivation, interlighting applications and indoor plants.
The SANlight 80 set includes everything you need for an 80cm x 80cm growing area.
Content:
1x EVO 4-80
1x Power Cord
1x SANlight Hangers (2 Pcs.) Load capacity 34 kg each
1x SANlight M-Dimmer
The SANlight 60 set includes everything you need for a 60cm x 60cm cultivation area.
Content:
1x EVO 3-60
1x Power Cord
1x SANlight Hangers (2 Pcs.) Load capacity 34 kg each
1x SANlight M-Dimmer
The SANlight 150 set includes everything you need for a 150cm x 150cm growing area.
Content:
2x EVO 5-150
1x Y-Power Cable (total length 3.30m, length plug to splitter 1.80m, length splitter to luminaire plug 1.50m)
2x SANlight Hangers (2 Pcs.) Load capacity 34 kg each
2x SANlight M-Dimmer
The SANlight 120 set includes everything you need for a 120cm x 120cm growing area.
Content:
2x EVO 4-120
1x Y-Power Cord (total length 3.30m, length plug to splitter 1.80m, length splitter to luminaire plug 1.50m)
2x SANlight Hangers (2 Pcs.) Load capacity 34 kg each
2x SANlight M-Dimmer
The SANlight 100 set includes everything you need for a 100cm x 100cm growing area.
Content:
2x EVO 3-100
1x Y-Power Cord (total length 3.30m, length plug to splitter 1.80m, length splitter to luminaire plug 1.50m)
2x SANlight Hangers (2 Pcs.) Load capacity 34 kg each
2x SANlight M-Dimmer
One magnetic dimmer is required for each luminaire that is to be dimmed.
Attention: does not fit for Q series.
SANlight bundle to light your 3.0 x 3.0 tent area
