The Mini RayTemp infrared thermometer is a compact, lightweight and low cost infrared thermometer. Simply aim and pull the trigger to display the temperature of the item being measured. The Mini RayTemp® measures temperature over the range of -50 to 330°C with an assured accuracy of ±2°C over the range of 0 to 330°C, outside of this range (-50 to 0°C) accuracy is ±4°C. This infrared thermometer has a clear, easy to read, LCD display with low battery, and backlight indication and an auto power off facility that turns the instrument off after 10 seconds, maximising battery life. The Mini RayTemp® is ideal for numerous temperature measurement applications where contact with the item to be measured is an issue. The Mini RayTemp also incorporates laser assisted alignment as standard, to assist in pin-pointing the area of measurement. The unit incorporates a 12:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.95 making it suitable for a wide range of food and industrial applications. RayTemp® is a registered trademark

The 8100 Plus pH meter is a three-in-one instrument that features a large easy to read, LCD display that indicates pH over the range of -2 to 16 pH with a resolution of 0.01 pH, mV over the range of -1000 to 1000 mV and temperature over the range of -39.9 to 149.9 °C with a resolution of 0.1 °C. The LCD display features both low battery indication and an user selectable backlight. The pH readings are either manually or automatically temperature compensated over the operating range of 0 to 80°C. To automatically compensate, it is necessary to utilise a thermistor temperature probe. Each unit incorporates an auto-power off facility that automatically turns the instrument off after ten minutes, maximising battery life. The 8100 Plus has an integrated rubber seal to ensure complete water resistance and helps to reduce the possibility of damage in harsh environments.

Connect automaticly with your room on the go, includes 16A on / off function for heater / water system or humidifier

3.5 Pint Mixing & Measuring Jug

Quality product with easy to read metric and imperial measurements

Well designed spout for easy pouring

Broad base & sturdy handle - suitable for both mixing and measuring 

2 Pint Mixing & Measuring Jug

Quality product with easy to read metric and imperial measurements

Well designed spout for easy pouring

Broad base & sturdy handle - suitable for both mixing and measuring 

1 Pint Mixing & Measuring Jug

Quality product with easy to read metric and imperial measurements

Well designed spout for easy pouring

Broad base & sturdy handle - suitable for both mixing and measuring 

Bluelab Pulse Multimedia EC/MC Meter

3-in-1 digital soil handheld meter measuring moisture, nutrient and temperature directly in growing media.

Measure directly in the root zone

Measure in a range or growing media

All 3 measurements in under 10 seconds

Connects directly to your phone via the Bluetooth Pulse App

App provides automated data collection & measurement comparison

Available for Android (5.1+) Bluetooth (4.0+) & iOS 12.1 or later

Probe length 200 mm/8"

1x AA battery included

1x Phillips head screwdriver (for battery installation)

1-year guarantee

Bluelab Probe Care Kit - pH

A complete maintenance kit for Bluelab pH Probes.

pH Probe care instructions

20 ml single-use Bluelab Solution Sachets, 2 each of pH7.0, pH 4.0, and KCl

3x plastic cups

Bluelab pH Probe Cleaner Solution

Bluelab Toothbrush (pH probe cleaning instrument)

Bluelab Probe Care Kit - Conductivity

A complete maintenance kit for Bluelab Conductivity Probes.

Conductivity Probe care instructions

2x 20 ml single-use Bluelab Solution Sachets, 2 of 2.77 EC Conductivity Standard Solution

Plastic cup

Bluelab Conductivity Probe Cleaning Solution

Bluelab Chamois (conductivity probe cleaning instrument)

Bluelab Pro Controller Connect

Automated, constant control of reservoir pH & nutrient levels. When connected to a dosing system it manages pH & conductivity levels in reservoirs. Your pH & nutrient levels are automatically adjusted to the desired set point. Allows you to monitor, log data & control in real-time for immediate response to personalised settings & system alerts.

Customise your system by pairing with the relevant Bluelab PeriPod

Includes Connect Stick 2

2 year guarantee for Bluelab Pro Controller, Pro Controller Conductivity Probe & Bluelab Temperature Probe

6 month guarantee for Bluelab pH Probe

Bluelab's 2.77EC Conductivity Solution, pH 7.0 and pH 4.0 Calibration Solutions are now available in 20ml sachets.

pH measuring equipment must be cleaned and calibrated regularly to ensure they are giving the user accurate readings. pH instruments are calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). The 2.77EC Conductivity solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/CF probe. Calibration Solutions should be stored in a cool place out of direct sun and heat. Please keep out of reach of children. They should be stored with the lids securely tightened.

Bluelab's 2.77EC Conductivity Solution, pH 7.0 and pH 4.0 Calibration Solutions are now available in 20ml sachets.

pH measuring equipment must be cleaned and calibrated regularly to ensure they are giving the user accurate readings. pH instruments are calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). The 2.77EC Conductivity solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/CF probe. Calibration Solutions should be stored in a cool place out of direct sun and heat. Please keep out of reach of children. They should be stored with the lids securely tightened.

Care, hydration and calibration – in one kit

Everything you need to clean, calibrate and maintain your pH and conductivity probes

Your Bluelab Probe Care Kit – pH and Conductivity contains:

Probe care instructions

18 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0, KCl and 2.77 EC standard solution

Three plastic cups

Bluelab pH Probe Cleaner

Bluelab Conductivity Probe Cleaner

Toothbrush for cleaning your pH probe

Chamois for cleaning your conductivity probe

Packaging may vary

Bluelab Peripod M3 120 ml/min per pump

3 x 120 ml/min peristaltic pumps to be used as needed for dosing nutrients

or pH solutions. Designed to respond to dosing triggers received from the

Bluelab Pro Controller.

Accurately measure, control & maintain pH & nutrient levels to a required set point

1 x 120 ml/min peristaltic pump for dosing pH-adjusting solution

2 x 120 ml/min peristaltic pump for dosing nutrient stock solutions

2-year guarantee for Bluelab PeriPod

6 month guarantee for pumps & tubes

Multimeter pH Meter pH measurement Plants all need a particular pH to maximize the uptake of nutrient solution. Without taking control of the pH, plants can’t take up the necessary elements they need for good strong growth. The Bluelab pH Meter is the perfect, portable way to accurately measure the pH value of a solution so you can add the right amount of pH up or down to get growth back on track. Simply place the pH probe into the solution and the selected reading is displayed on screen. As the meter is hand held and does not require a power supply to operate, it can be used anywhere, anytime. Calibration of the pH probe is simple as instructions are supplied on the back of the meter and the easy push button method makes this one of the simplest pH Meters in its class to use. The pH probe can be purchased as a replacement so you can keep on using the Bluelab pH Meter for years to come.

Conductivity Pen pH and temperature measurement The Bluelab Conductivity Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed. To feed plants well, we need to know what we’re feeding them. Start with a quality nutrient. Measuring the conductivity every day is the best way to avoid over-diluting or over-concentrating your nutrient solution. Completely change the reservoir solution every 7 days. Top up the nutrient level between changes - so your plants always have the right amount of food. The Bluelab Conductivity Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 - 22˚C or 65 - 72˚F is recommended.

Combi Meter pH, EC and temperature measurement The Bluelab Combo Meter is a portable all in one pH, conductivity and temperature meter. If you are experiencing problems with yellow leaves, or slow stunted growth, the Bluelab Combo Meter will soon tell you if each parameter is within the plants requirements. Adjustments can be quickly made to get your crop back on track. The Bluelab Combo Meter has two probes, a Bluelab pH Probe and a Bluelab Conductivity/Temperature Probe. When taking a reading, simply place them into the solution and the selected reading is displayed on screen. As the Bluelab Combo Meter is portable and battery operated, it can be used anywhere, anytime to help you manage your crops’ daily nutrient requirements. Calibration of the pH probe is simple, as instructions are supplied on the back of the meter and the easy push button method makes this one of the simplest meters to use. The pH probe is replaceable so you can use this meter for years to come. The conductivity/temperature probe does not require calibration as this is locked in during manufacture. Measures pH, conductivity / nutrient (EC, CF, ppm 500 and ppm 700) and temperature (°C, °F) Lightweight and portable ∙ Large easy to read display ∙ Simple push button pH calibration.

Truncheon Nutrient Meter EC measurement It is essential when growing with a hydroponic solution to know what the strength of the solution is, before feeding your plants, and while they are growing. If the conductivity reading is too low, your plants may not be getting enough nutrients. If the conductivity reading is too high, plants can dehydrate. Understanding the conductivity of the nutrient solution takes the guesswork out of feeding plants. It will also save you money! Using the Bluelab Truncheon® Nutrient Meter is the fastest and easiest way to measure the conductivity! To take a reading of your solution - simply place the probe head into the solution and the reading is indicated by the flashing lights. Calibration of the Truncheon Nutrient Meter is not required.