2488 products
2488 products
Sort by:
DYNOMYCO™ is a vegetable and herbal-specific mycorrhizal inoculant. It was formulated specifically for intense agricultural cultivation, through years of bio-assays combining numerous mycorrhizal strains and plant varieties. It contains two species of endomycorrhizal fungi, Glomus intraradices and Glomus mosseae, at a concentration of 900 propagules per gram: 700 propagules per gram of Glomus intraradices and 200 propagules per gram of Glomus mosseae. That’s higher than all of the leading products being sold fon the market– three times more concentrated than Mykos at 300 propagules/gram (2.3X more if comparing only Glomus intraradices) and a 2.3X more than Great White with their total of 387 propagules/gram over nine species of endomycorrhizal fungi (8.4X more if comparing only Glomus intraradices). The higher the propagule count, the more potent your inoculant, and the more likely you are to colonize the root and see any effect!
The two species of fungi contained in every single granule of DYNOMYCO™ are scientifically proven to have symbiotic relationships with many vegetable and herbal plants and are not put in the product just to make it seem like there’s a high concentration in it. One of the strains of Glomus intraradices inside DYNOMYCO™ was isolated in the Judean desert in Israel. It’s a very vigorous strain that’s managed to survive and thrive in the harshest desert conditions. This means that it’s dealt with the heat of the day and the cold temperatures of night, the lack of rainfall and also the flash floods, high salinity and varying pH levels.
DYNOMYCO™ is based on 30 years of R&D , including hundreds of beta trials with vegetable and herb growers in the USA and Israel, all prior to product launch on April 20th, 2019.
DYNOMYCO™ is a vegetable and herbal-specific mycorrhizal inoculant. It was formulated specifically for intense agricultural cultivation, through years of bio-assays combining numerous mycorrhizal strains and plant varieties. It contains two species of endomycorrhizal fungi, Glomus intraradices and Glomus mosseae, at a concentration of 900 propagules per gram: 700 propagules per gram of Glomus intraradices and 200 propagules per gram of Glomus mosseae. That’s higher than all of the leading products being sold fon the market– three times more concentrated than Mykos at 300 propagules/gram (2.3X more if comparing only Glomus intraradices) and a 2.3X more than Great White with their total of 387 propagules/gram over nine species of endomycorrhizal fungi (8.4X more if comparing only Glomus intraradices). The higher the propagule count, the more potent your inoculant, and the more likely you are to colonize the root and see any effect!
The two species of fungi contained in every single granule of DYNOMYCO™ are scientifically proven to have symbiotic relationships with many vegetable and herbal plants and are not put in the product just to make it seem like there’s a high concentration in it. One of the strains of Glomus intraradices inside DYNOMYCO™ was isolated in the Judean desert in Israel. It’s a very vigorous strain that’s managed to survive and thrive in the harshest desert conditions. This means that it’s dealt with the heat of the day and the cold temperatures of night, the lack of rainfall and also the flash floods, high salinity and varying pH levels.
DYNOMYCO™ is based on 30 years of R&D , including hundreds of beta trials with vegetable and herb growers in the USA and Israel, all prior to product launch on April 20th, 2019.
CO2 FUSION photosynthesis stimulator In Jurassic times ferns were huge due to very high atmospheric CO2 levels. Modern plants have evolved from these ferns to grow with lower CO2 levels. Spraying with CO2 Fusion allows the plants leaves to reach the same level of CO2 saturation as in Jurassic times, resulting in bigger leaves and more plant available chemical energy. CO2 Fusion is a unique combination of 100% natural plant hormones and amino acids, delivered directly to the plants leaf in a readily absorbed, stabilised CO2 infused mist. CO2 Fusion used on cuttings significantly speeds up the rooting process.
CO2 FUSION photosynthesis stimulator In Jurassic times ferns were huge due to very high atmospheric CO2 levels. Modern plants have evolved from these ferns to grow with lower CO2 levels. Spraying with CO2 Fusion allows the plants leaves to reach the same level of CO2 saturation as in Jurassic times, resulting in bigger leaves and more plant available chemical energy. CO2 Fusion is a unique combination of 100% natural plant hormones and amino acids, delivered directly to the plants leaf in a readily absorbed, stabilised CO2 infused mist. CO2 Fusion used on cuttings significantly speeds up the rooting process.
CANNA’s TRACE MIX consists of several trace elements that are essential for the development of your plants. These trace elements are used for several enzyme systems and therefore have an influence on the development of plants. TRACE MIX is a mineral fertiliser, which is extremely suitable as a supplementary nutrient to stimulate the growth and bloom of plants. Besides that it can serve to reduce the deficiency of trace elements.
Optimally improve the quality and quantity of the flower by using CANNA Organic Potassium. This organic product makes the cell wall stronger and in addition increases the resistance. CANNA Organic Potassium improves the production of proteins, bloom, and carbohydrates. It aslo improves the water management and the transport of water and nutrients in the plant. This fertiliser should not be mixed with magnesium and fertilisers containing calcium. As potassium fertiliser it can be used for example when there is a potassium deficiency.
The nutrients potassium and phosphorus are essential for flowering and fruit setting plants. CANNA PK 13/14 is a quality mixture of potassium and phosphorous compounds. CANNA PK 13/14 dissolves easily in (tap) water and is therefore immediately available. Use CANNA PK 13/14 from the moment the flower bud develops or at the onset of fruits. 15ml CANNA PK 13/14 per 10ml nutrient solution. CANNA only uses high grade nutrients and chelates which are immediately and completely available for the plant.
The nutrients potassium and phosphorus are essential for flowering and fruit setting plants. CANNA PK 13/14 is a quality mixture of potassium and phosphorous compounds. CANNA PK 13/14 dissolves easily in (tap) water and is therefore immediately available. Use CANNA PK 13/14 from the moment the flower bud develops or at the onset of fruits. 15ml CANNA PK 13/14 per 10ml nutrient solution. CANNA only uses high grade nutrients and chelates which are immediately and completely available for the plant.
The nutrients potassium and phosphorus are essential for flowering and fruit setting plants. CANNA PK 13/14 is a quality mixture of potassium and phosphorous compounds. CANNA PK 13/14 dissolves easily in (tap) water and is therefore immediately available. Use CANNA PK 13/14 from the moment the flower bud develops or at the onset of fruits. 15ml CANNA PK 13/14 per 10ml nutrient solution. CANNA only uses high grade nutrients and chelates which are immediately and completely available for the plant.
CANNA Phosphorus influences the bloom and the secondary metabolites and can in addition directly be absorbed by the plant due to its liquid form. CANNA Phosphorus is the perfect product for stimulating the bloom or cure a phosphorus deficiency in the plant. It is an essential element that plays a major part in the plant’s energy system.
Always add the nutrients to the water before checking and adjusting the pH of your solution. The nutrients will usually lower the pH of the water due to their chemical make-up. After adding the nutrients and mixing the solution, check the pH using whichever method you prefer and decide whether you need a product to raise or lower the pH. Add small amounts of pH adjuster. Stir very well and check the pH again. Repeat the above steps until the pH reaches the desired level.
Always add the nutrients to the water before checking and adjusting the pH of your solution. The nutrients will usually lower the pH of the water due to their chemical make-up. After adding the nutrients and mixing the solution, check the pH using whichever method you prefer and decide whether you need a product to raise or lower the pH. Add small amounts of pH adjuster. Stir very well and check the pH again. Repeat the above steps until the pH reaches the desired level.
CANNA Organo Acid can be used as an organic alternative for CANNA pH-. It can be used to bring down the pH values in your water or substrate. Maintaining the right pH value is crucial for your plant’s ability to take up nutrients. It also serves as an alternative for nitric acid and phosphoric acid.
CANNA Nitrogen stimulates the growth of your plants. It plays a major part in the production of proteins and in the energy metabolism, which is essential for the development of the plant. It can be used for nitrogen deficiency and as a supplementary nutrient to stimulate the growth. CANNA Nitrogen is also an essential nutritional element for improving the juice production. The liquid can be directly absorbed by the plant and improves the vegetative growth.
CANNA Magnesium is essential for photosynthesis. It is an essential atom in chlorophyll. Furthermore, magnesium influences other pigments and physiological processes. This makes it an essential element in the development of the plant. CANNA Magnesium can be directly absorbed by the plant and therefore the effects can be seen quite soon. It can be used as a fertiliser for magnesium deficiency and as a supplementary nutrient to stimulate the growth and bloom.
CANNA Iron helps a number of important functions in the plant’s total metabolism and that makes it an essential element. It plays the major part in photosynthesis and a large part in the production of chlorophyll. Furthermore it has a big influence on physiological processes and on the energy system. CANNA Iron is chelated so can be absorbed by the plant directly, can be mixed with all fertilisers and is pH stable. It is a perfect product to replenish iron deficiency and to stimulate the growth and bloom.
CANNA Flush is a product to clean substrates and plants from any excess nutrients. Excess nutrients in the root zone of a plant can lead to overfertilisation or malnutrition, for example. When used just before harvest it makes sure the plant gets rid of all excess, which will lead to a clean and tasteful harvest. CANNA Flush effectively cleans the substrate without killing any useful bacteria or beneficial fungi, as can be the case when you use reverse osmosis or de-mineralised water. It can be used on all substrates. CANNA Flush is recyclable.
CANNA Flush is a product to clean substrates and plants from any excess nutrients. Excess nutrients in the root zone of a plant can lead to overfertilisation or malnutrition, for example. When used just before harvest it makes sure the plant gets rid of all excess, which will lead to a clean and tasteful harvest. CANNA Flush effectively cleans the substrate without killing any useful bacteria or beneficial fungi, as can be the case when you use reverse osmosis or de-mineralised water. It can be used on all substrates. CANNA Flush is recyclable.
