2449 products
2449 products
Sort by:
All·Mix® literally does it all for you – creating the optimum environment for plants to flourish throughout the year. This heavily pre-fertilized substrate mixture emulates a rich outdoor soil with a full micro active ecosystem. It’s been designed to have enough nutrient-fuelled power to sustain lush growth for a couple weeks, without any need to add any extra fertilizer. When using All·Mix for the first time, moisten it with water and leave to stand for 36 hours. This gives the Pre·Mix™ active fertilizer and microorganisms inside the substrate a chance to start working their magic before the plants goes in. Keep the soil slightly warm at all times – if it’s too cool, the microbial activity slows down, which makes it more difficult for the plants to grow. You also want to allow the soil to dry out between each watering. Because, as the All·Mix substrate dries out, fresh air gets in, which helps the soil to breathe.
Designed to fit our DUCTING FLANGE system, our range of extractors can also be used conventionally by adding two DF16100 connectors, 125 or 150mm.
The interface allows you to select temperature, minimum extraction and maximum extraction to optimally regulate your environment.
The 24 volt EC motor allows you to adjust the extraction speed and therefore save 30-40% energy compared to AC extractors.
Once the extractor is installed, you simply connect the corresponding filter to your growing area. Its high capacity activated carbon CTC80 ensures optimal protection for a long time.
Designed to fit our DUCTING FLANGE system, our range of extractors can also be used conventionally by adding two DF16100 connectors, 125 or 150mm.
The interface allows you to select temperature, minimum extraction and maximum extraction to optimally regulate your environment.
The 24 volt EC motor allows you to adjust the extraction speed and therefore save 30-40% energy compared to AC extractors.
Once the extractor is installed, you simply connect the corresponding filter to your growing area. Its high capacity activated carbon CTC80 ensures optimal protection for a long time.
Budbox-Pro - Since its inception, over 10 years ago, BudBox™ has been, and remains, the most trusted name in the indoor grow tent market. Right from the start they have remained at the very forefront, continuing to manufacture and supply high quality, tried, tested and trusted grow tents to both the professional and hobbyist grower. As concept developers, BudBox have, throughout the last 10 years, continued to upgrade, improve and re-style the BudBox™ Grow Tents in line with the feedback they receive from customers and in line with our own philosophy to constantly strive for perfection. The BudBox™ Pro grow tent has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The complete range of BudBox™ Pro Grow Tent’s are equipped with steel, push and click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements. BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anticorrosion protection and a very clean and reflective look. The philosophy of BudBox™ is and will remain the cornerstone of our success and is not open to negotiation or compromise, BudBox use the best there is! All the component parts used in the construction of BudBox™ Grow Tents are sourced, tried and tested and are guaranteed safe for plants and people to use.
Spigot plate adaptors allow for the creation of a spigot connection onto a normal flat surfacewhether it is horizonal, verticle or angled. These adaptors can be secured by screw, rivet or nut and bolts onto any flat surface. They have a flat square backing with a round spigot for connection to flexible ducting or rigid spiral ducting .
Spigot plate adaptors allow for the creation of a spigot connection onto a normal flat surfacewhether it is horizonal, verticle or angled. These adaptors can be secured by screw, rivet or nut and bolts onto any flat surface. They have a flat square backing with a round spigot for connection to flexible ducting or rigid spiral ducting .
WHITE BLACK COMBI DUCTING
White-Black Combi Ducting is made from aluminium and polyester mixed with a flexible steel helix to make a strong and long lasting, crimp resistant duct for your grow room. A white reflective covering and black inner finishes the design to effectively reflect light and heat and reduce the noise from air movement making your grow room ventilation system work more efficiently.
Aluminium and polyester bonded with a flexible steel helix
Long lasting and resists crimping
Airtight to prevent odour leaks
White reflective covering to reflect light and heat
Available in 5 and 10 metre lengths, from 4 to 14 inches
Extractor Kit entry level fan/filter kit The Garden Highpro extractor kit comes in three sizes and is designed to be used as a budget ventilation kit for smaller tents. The fan is the garden highpro profan TT Max, the filter is a proactive carbon filter, lightweight and compact, it is made from coconut activated carbon and is matched to the air volume produces by the fan. The free-flowing design of the filters enables them to be fitted to the fans with very little change in flow rates. The complete kit comes in its own branded box and included inside is a fan, 5m aluminium ducting and two jubilee clips. Available in the following sizes: 100, 125 and 150mm.
Evolution Carbon Dioxide Controller Full Kit:Click on graphic for larger imageThe Evolution CO2 Controller monitors CO2 Levels within the grow room and constantly adjusts the amount of CO2 to maintain ideal conditions for optimal plant growth. The Evolution CO2 Controller is also compatible with the Evolution Digital Fan Speed Controller The Evolution controller utilizes the latest microprocessor and infra-red technology to monitor & control the levels of carbon dioxide in your growing area.The controller can operate with the Evolution Solid State NDIR CO2 sensor, this controller can also be used with either bottled CO2 gas or with a propane or natural gas burning CO2 generator, in addition to this the Evolution controller can be interfaced to most external thermostat / hygrostats for improved environmental control
Wind King Oscillating Wall Fan
This new Wall Fan is the new generation of wall fans coming to the hydroponic industry.
It is the upmost importance to ensure you have air mixed in your grow space to ensure any stale, damp, or CO2 air move around freely to help plants grow. Many growers complain about typical pedestal fans taking up too much room and not reaching the desired height needed, however this fan will mount to your wall saving you space and giving you the freedom to position it to any height needed.
The key reason growers are now switching to this fan is because of its new circular oscillating pattern. Usual oscillating wall fans will move side to side, however the Wind King will move in a ‘O’ shape making sure more air is being mixed in your grow space.
Benefits of using Wind King Oscillating Wall Fan:
16″ fan ensuring lost of air movement.
3 different speed settings.
Wall mounted – saving space.
5 blades for even better air movement.
Motor that is thermally protected.
Reliable and long lasting.
‘O’ shaped circular oscillation pattern meaning the air will mix above and below.
On and off oscillating feature.
How to use:
Ensure you put this product in a place where it is at a good height so it can treat the tops of the plants.
Using the mountings provided simply fix the Wind King to the wall and run power to it from a mains outlet socket.
Set your desired speed by turning the power switch. To turn your oscillation on and off simply pull the cord at the bottom.
Key Features:
Power: 120v, 60Hz
Max amps: 5A
