DYNOMYCO™ is a vegetable and herbal-specific mycorrhizal inoculant. It was formulated specifically for intense agricultural cultivation, through years of bio-assays combining numerous mycorrhizal strains and plant varieties. It contains two species of endomycorrhizal fungi, Glomus intraradices and Glomus mosseae, at a concentration of 900 propagules per gram: 700 propagules per gram of Glomus intraradices and 200 propagules per gram of Glomus mosseae. That’s higher than all of the leading products being sold fon the market– three times more concentrated than Mykos at 300 propagules/gram (2.3X more if comparing only Glomus intraradices) and a 2.3X more than Great White with their total of 387 propagules/gram over nine species of endomycorrhizal fungi (8.4X more if comparing only Glomus intraradices). The higher the propagule count, the more potent your inoculant, and the more likely you are to colonize the root and see any effect!

The two species of fungi contained in every single granule of DYNOMYCO™ are scientifically proven to have symbiotic relationships with many vegetable and herbal plants and are not put in the product just to make it seem like there’s a high concentration in it. One of the strains of Glomus intraradices inside DYNOMYCO™ was isolated in the Judean desert in Israel. It’s a very vigorous strain that’s managed to survive and thrive in the harshest desert conditions. This means that it’s dealt with the heat of the day and the cold temperatures of night, the lack of rainfall and also the flash floods, high salinity and varying pH levels.

DYNOMYCO™ is based on 30 years of R&D , including hundreds of beta trials with vegetable and herb growers in the USA and Israel, all prior to product launch on April 20th, 2019.

DYNOMYCO™ is a vegetable and herbal-specific mycorrhizal inoculant. It was  formulated specifically for intense agricultural cultivation, through years of bio-assays  combining numerous mycorrhizal strains and plant varieties. It contains two species of endomycorrhizal fungi, Glomus intraradices and Glomus mosseae, at a concentration of 900 propagules per gram: 700 propagules per gram of Glomus intraradices and 200 propagules per gram of Glomus mosseae. That’s higher than all of the leading products being sold fon the market– three times more concentrated than Mykos at 300 propagules/gram (2.3X more if comparing only Glomus intraradices) and a 2.3X more than Great White with their total of 387 propagules/gram over nine species of endomycorrhizal fungi (8.4X more if comparing only Glomus intraradices). The higher the propagule count, the more potent your inoculant, and the more likely you are to colonize the root and see any effect!

The two species of fungi contained in every single granule of DYNOMYCO™ are  scientifically proven to have symbiotic relationships with many vegetable and herbal plants and are not put in the product just to make it seem like there’s a high concentration in it. One of the strains of Glomus intraradices inside DYNOMYCO™ was isolated in the Judean desert in Israel. It’s a very vigorous strain that’s managed to survive and thrive in the harshest desert conditions. This means that it’s dealt with the heat of the day and the cold temperatures of night, the lack of rainfall and also the flash floods, high salinity and varying pH levels. 

DYNOMYCO™ is based on 30 years of R&D , including hundreds of beta trials with  vegetable and herb growers in the USA and Israel, all prior to product launch on April 20th, 2019.

DYNOMYCO™ is a vegetable and herbal-specific mycorrhizal inoculant. It was formulated specifically for intense agricultural cultivation, through years of bio-assays combining numerous mycorrhizal strains and plant varieties. It contains two species of endomycorrhizal fungi, Glomus intraradices and Glomus mosseae, at a concentration of 900 propagules per gram: 700 propagules per gram of Glomus intraradices and 200 propagules per gram of Glomus mosseae. That’s higher than all of the leading products being sold fon the market– three times more concentrated than Mykos at 300 propagules/gram (2.3X more if comparing only Glomus intraradices) and a 2.3X more than Great White with their total of 387 propagules/gram over nine species of endomycorrhizal fungi (8.4X more if comparing only Glomus intraradices). The higher the propagule count, the more potent your inoculant, and the more likely you are to colonize the root and see any effect!

The two species of fungi contained in every single granule of DYNOMYCO™ are scientifically proven to have symbiotic relationships with many vegetable and herbal plants and are not put in the product just to make it seem like there’s a high concentration in it. One of the strains of Glomus intraradices inside DYNOMYCO™ was isolated in the Judean desert in Israel. It’s a very vigorous strain that’s managed to survive and thrive in the harshest desert conditions. This means that it’s dealt with the heat of the day and the cold temperatures of night, the lack of rainfall and also the flash floods, high salinity and varying pH levels.

DYNOMYCO™ is based on 30 years of R&D , including hundreds of beta trials with vegetable and herb growers in the USA and Israel, all prior to product launch on April 20th, 2019.

DYNOMYCO™ is a vegetable and herbal-specific mycorrhizal inoculant. It was  formulated specifically for intense agricultural cultivation, through years of bio-assays  combining numerous mycorrhizal strains and plant varieties. It contains two species of endomycorrhizal fungi, Glomus intraradices and Glomus mosseae, at a concentration of 900 propagules per gram: 700 propagules per gram of Glomus intraradices and 200 propagules per gram of Glomus mosseae. That’s higher than all of the leading products being sold fon the market– three times more concentrated than Mykos at 300 propagules/gram (2.3X more if comparing only Glomus intraradices) and a 2.3X more than Great White with their total of 387 propagules/gram over nine species of endomycorrhizal fungi (8.4X more if comparing only Glomus intraradices). The higher the propagule count, the more potent your inoculant, and the more likely you are to colonize the root and see any effect!

The two species of fungi contained in every single granule of DYNOMYCO™ are  scientifically proven to have symbiotic relationships with many vegetable and herbal plants and are not put in the product just to make it seem like there’s a high concentration in it. One of the strains of Glomus intraradices inside DYNOMYCO™ was isolated in the Judean desert in Israel. It’s a very vigorous strain that’s managed to survive and thrive in the harshest desert conditions. This means that it’s dealt with the heat of the day and the cold temperatures of night, the lack of rainfall and also the flash floods, high salinity and varying pH levels. 

DYNOMYCO™ is based on 30 years of R&D , including hundreds of beta trials with  vegetable and herb growers in the USA and Israel, all prior to product launch on April 20th, 2019.

The perfect Rooting Gel for the Organic Gardener from Cutting Edge!

At last, there is an organic rooting hormone solution for the gardener that that likes to keep everything organic and natural. Cutting Edge have released this Rooting Gel that contains only natural ingredients, assuring the grower that nothing synthetic has gone into their plants from start to finish.

Promotes rapid and vigorous root cell development

100% Organic

Harvested in a sustainable way

Help reduce stem rot

Strengthens the plant’s immune system

Pure natural extract from Eastern Atlantic Seaweed

Supplied in a convenient and easy-to-apply tube

Readily covers and sticks to plant tissue

How Cutting Edge Organic Rooting Gel Works:

When taking cuttings, a rooting hormone is invaluable for speeding up the rooting process and preventing rot before roots strike and become established. Until now it has been difficult for the Organic Gardener to find a non-synthetic natural rooting gel that doesn’t disrupt the 100% organic growing process. Now that’s all changed with the release of Cutting Edge’s 100% natural and Organic Rooting Gel. This product is made from seaweed which has been harvested from the Eastern Atlantic Ocean. It is cropped in a completely sustainable way which means that the natural harmony and balance of the ocean is not disturbed. The extract from the harvested seaweed contains natural hormones and anti-fungal properties which, when applied to the bottom inch or two of a freshly taken cutting, will greatly speed up the process of striking roots, and help it to resist stem-rot. It naturally helps to strengthen the cutting’s immune system meaning that it will stand the best chance of becoming a robust and well-developed plant.

How to use Cutting Edge Rooting Gel:

For best results, only choose healthy and thick-stemmed shoots from the mother plant to take a cutting from. Using a sterile and very sharp knife (preferably a brand new sterile scalpel) make a diagonal cut across the stem which is about half an inch to an inch from one of the “nodes” (the point on the stem where leaves come out from). Secondly, slice off the leaves where they join onto the main stem.

Next, coat a bottom couple of inches in the Cutting Edge Rooting Gel and place it into a rooting plug, Rooting plugs such as Jiffy peat-plugs, Rockwool plugs and flex mix plugs all work well. For Organic purposes, peat-plugs or flex mix plugs will help keep everything natural.

Ideally, keep the cutting(s) in a propagator and keep them lit with a cool-blue fluorescent light above it. Take the lid off and lightly mist the cuttings at least once, if not twice a day until roots have become established. 

CO2 FUSION photosynthesis stimulator In Jurassic times ferns were huge due to very high atmospheric CO2 levels. Modern plants have evolved from these ferns to grow with lower CO2 levels. Spraying with CO2 Fusion allows the plants leaves to reach the same level of CO2 saturation as in Jurassic times, resulting in bigger leaves and more plant available chemical energy. CO2 Fusion is a unique combination of 100% natural plant hormones and amino acids, delivered directly to the plants leaf in a readily absorbed, stabilised CO2 infused mist. CO2 Fusion used on cuttings significantly speeds up the rooting process.

CO2 FUSION photosynthesis stimulator In Jurassic times ferns were huge due to very high atmospheric CO2 levels. Modern plants have evolved from these ferns to grow with lower CO2 levels. Spraying with CO2 Fusion allows the plants leaves to reach the same level of CO2 saturation as in Jurassic times, resulting in bigger leaves and more plant available chemical energy. CO2 Fusion is a unique combination of 100% natural plant hormones and amino acids, delivered directly to the plants leaf in a readily absorbed, stabilised CO2 infused mist. CO2 Fusion used on cuttings significantly speeds up the rooting process.

CANNA’s TRACE MIX consists of several trace elements that are essential for the development of your plants. These trace elements are used for several enzyme systems and therefore have an influence on the development of plants. TRACE MIX is a mineral fertiliser, which is extremely suitable as a supplementary nutrient to stimulate the growth and bloom of plants. Besides that it can serve to reduce the deficiency of trace elements.

Optimally improve the quality and quantity of the flower by using CANNA Organic Potassium. This organic product makes the cell wall stronger and in addition increases the resistance. CANNA Organic Potassium improves the production of proteins, bloom, and carbohydrates. It aslo improves the water management and the transport of water and nutrients in the plant. This fertiliser should not be mixed with magnesium and fertilisers containing calcium. As potassium fertiliser it can be used for example when there is a potassium deficiency.

The nutrients potassium and phosphorus are essential for flowering and fruit setting plants. CANNA PK 13/14 is a quality mixture of potassium and phosphorous compounds. CANNA PK 13/14 dissolves easily in (tap) water and is therefore immediately available. Use CANNA PK 13/14 from the moment the flower bud develops or at the onset of fruits. 15ml CANNA PK 13/14 per 10ml nutrient solution. CANNA only uses high grade nutrients and chelates which are immediately and completely available for the plant.

The nutrients potassium and phosphorus are essential for flowering and fruit setting plants. CANNA PK 13/14 is a quality mixture of potassium and phosphorous compounds. CANNA PK 13/14 dissolves easily in (tap) water and is therefore immediately available. Use CANNA PK 13/14 from the moment the flower bud develops or at the onset of fruits. 15ml CANNA PK 13/14 per 10ml nutrient solution. CANNA only uses high grade nutrients and chelates which are immediately and completely available for the plant.

CANNA Phosphorus influences the bloom and the secondary metabolites and can in addition directly be absorbed by the plant due to its liquid form. CANNA Phosphorus is the perfect product for stimulating the bloom or cure a phosphorus deficiency in the plant. It is an essential element that plays a major part in the plant’s energy system.

Always add the nutrients to the water before checking and adjusting the pH of your solution. The nutrients will usually lower the pH of the water due to their chemical make-up. After adding the nutrients and mixing the solution, check the pH using whichever method you prefer and decide whether you need a product to raise or lower the pH. Add small amounts of pH adjuster. Stir very well and check the pH again. Repeat the above steps until the pH reaches the desired level.

Always add the nutrients to the water before checking and adjusting the pH of your solution. The nutrients will usually lower the pH of the water due to their chemical make-up. After adding the nutrients and mixing the solution, check the pH using whichever method you prefer and decide whether you need a product to raise or lower the pH. Add small amounts of pH adjuster. Stir very well and check the pH again. Repeat the above steps until the pH reaches the desired level.

CANNA Organo Acid can be used as an organic alternative for CANNA pH-. It can be used to bring down the pH values in your water or substrate. Maintaining the right pH value is crucial for your plant’s ability to take up nutrients. It also serves as an alternative for nitric acid and phosphoric acid.

CANNA Nitrogen stimulates the growth of your plants. It plays a major part in the production of proteins and in the energy metabolism, which is essential for the development of the plant. It can be used for nitrogen deficiency and as a supplementary nutrient to stimulate the growth. CANNA Nitrogen is also an essential nutritional element for improving the juice production. The liquid can be directly absorbed by the plant and improves the vegetative growth.

CANNA Magnesium is essential for photosynthesis. It is an essential atom in chlorophyll. Furthermore, magnesium influences other pigments and physiological processes. This makes it an essential element in the development of the plant. CANNA Magnesium can be directly absorbed by the plant and therefore the effects can be seen quite soon. It can be used as a fertiliser for magnesium deficiency and as a supplementary nutrient to stimulate the growth and bloom.

CANNA Iron helps a number of important functions in the plant’s total metabolism and that makes it an essential element. It plays the major part in photosynthesis and a large part in the production of chlorophyll. Furthermore it has a big influence on physiological processes and on the energy system. CANNA Iron is chelated so can be absorbed by the plant directly, can be mixed with all fertilisers and is pH stable. It is a perfect product to replenish iron deficiency and to stimulate the growth and bloom.