The AutoPot SmartPot System combines our power-free, water efficient, low maintenance, modular systems with high performance fabric pots for the first time. SmartPots stimulate plant growth by aerating, feeding and guiding the root structure rather than merely containing it.

The porous BPA-free, lead-free SmartPot material allows improved gas exchange in the substrate. Free to breathe the root zone can see dramatically enhanced oxygen levels – supercharging growth.

When root tips reach the porous side of a SmartPot they are ‘air-pruned’ – detered from extending any further by the air outside. Secondary roots then develop, creating a fibrous root structure with vastly improved moisture and nutrient uptake. Root circling is also thus eliminated making it possible to produce bigger plants from smaller pots.

Extremely durable and reusable the SmartPots are easily cleaned betwen uses if desired. Once emptied the SmartPots are best left to dry. After a few days any dust and small roots are easily brushed off. Whilst this level of cleaning is completely sufficient the SmartPot may be machine or tub washed in peroxide in order to sterilize. Do not put SmartPots in a tumble dryer.

A SmartPot XL System contains all you need to set up an automated watering system with fabric pots. The compact size and portability that SmartPot brings to XL means jaw-dropping reductions in shipping costs and much easier storage for stores and growers alike.

As with all of our systems the SmartPot System is easily extended so many pots can be linked to a single reservoir. The pots and trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up with a water and nutrient filled reservoir this extremely versatile, gravity-fed system will run automatically. It will completely take care of all your plants needs without the need for pumps, timers or intensive maintenance.

When growing in AutoPot Watering Systems it is essential that a PotSock Round (PotSock included) be fitted to the base of each SmartPot to provide root control.

Please note: Room humidity may be increased when growing with multiple SmartPots indoors due to the exposed, porous surface of the fabric pots.

The 9 Pot System is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The 9 Pot System is easily extended so many pots can be linked to a single tank. Please see examples of typical layouts using 9mm pipe or 16mm pipe. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

All you need to do is remember to fill up your tank from time to time. 

The 1Pot XL System is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The 1Pot XL System is easily extended so many pots can be linked to a single tank. Please see examples of typical layouts using 9mm pipe or 16mm pipe. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

All you need to do is remember to fill up your tank from time to time.

The AQUAvalve is supplied with all the AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used allowing the plant to go through a wet & dry cycle. Once all the water has been used by the plants the AQUAvalve will re-open and refill the tray. The AQUAvalve is a simple but very effective watering device and needs to be treated with care. Keep the AQUAvalve and the tray it sits in clean, free of obstructions, soil particles and it will help you water & feed your plants for many years. The AQUAvalve is guaranteed for 12 months.

A 9mm or 6mm cross connector supplied individually and used to connect four pieces of pipe together. These are useful along with the 9mm or 6mm tee connectors as they provide the user with the ability to create a layout to suit his or her needs.

easy2GO is the ultimate holiday watering kit for happy, healthy plants. By incorporating the patented AQUAvalve, the easy2GO will keep plants watered for weeks using a simple gardening tray and water butt. The easy2GO is placed directly onto the tray along with your potted plants and distributes water to the pots from below. Unlike other holiday watering kits, the easy2GO provides optimum levels of water to meet the plants requirements – without the need for timers or electricity – ensuring you return from holiday to plants that are thriving.

Increase the efficiency of your irrigation system with the Autopot 9mm Elbow - (C). This elbow fitting is designed to connect 9mm irrigation tubes, allowing for smooth water flow and reducing the risk of blockages. Made with durable materials for long-lasting use.

Autopot 9mm Elbow - (C)

End Stops are used to cap the ends of pipework runs. In some instances you may find that you have an end spare, if so simply cap the end by using one of these end stops! Alternatively you can use an in-line tap as this will allow you to flush the lines.

The 9mm or 6mm Golf Filter is for use with 30 L & 47 L plastic reservoirs. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube.

9mm or 6mm in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 L plastic reservoirs. This allows you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

Please note that this product is sold individually.

All AutoPot Watering Systems, Modules and Kits are now supplied with 9mm pipe and fittings suitable for AQUAvalve5.

9mm pipe features co-extruded construction and metre markings for ease of measuring

9mm pipe has an outside diameter of 9mm and an internal diameter of 7mm. The composite and design of the pipe has been chosen to complement the AutoPot range and to ensure that easy connection is achieved and that water flow is at its maximum.

6mm pipe remains available for those running older systems featuring pre-August 2020 AQUAvalves.

Please note that this listing is for a 1.5 metre length

All AutoPot Watering Systems, Modules and Kits are now supplied with 9mm pipe and fittings suitable for AQUAvalve5.

9mm pipe features co-extruded construction and metre markings for ease of measuring

9mm pipe has an outside diameter of 9mm and an internal diameter of 7mm. The composite and design of the pipe has been chosen to complement the AutoPot range and to ensure that easy connection is achieved and that water flow is at its maximum.

6mm pipe remains available for those running older systems featuring pre-August 2020 AQUAvalves.

Please note that this listing is for a 1.0 metre length

All AutoPot Watering Systems, Modules and Kits are now supplied with 9mm pipe and fittings suitable for AQUAvalve5.

9mm pipe features co-extruded construction and metre markings for ease of measuring.

9mm pipe has an outside diameter of 9mm and an internal diameter of 7mm. The composite and design of the pipe has been chosen to complement the AutoPot range and to ensure that easy connection is achieved and that water flow is at its maximum.

Please note that this listing is for a 30 metre roll of 9mm pipe 

Maximize the efficiency of your irrigation system with the Autopot 9mm Single Pot Complete. This module comes with all necessary fittings, making installation a breeze. No need for manual watering, as this system automatically provides plants with the perfect amount of water and nutrients, resulting in healthier and more abundant growth.

Autopot Single Pot System 9mm

Straight connectors are simply used to connect two pieces of pipe together, allowing for virtually seamless system extension.

9mm or 6mm cross connectors are used to connect three pieces of pipe together. These are useful along with the 9mm or 6mm cross connectors as they provide the user with the ability to create a layout to suit his or her needs.

Top Hat Grommets provide a water tight connection using 9mm or 6mm pipe with the 30 & 47 L plastic reservoirs.

The Top Hat Grommet is positioned at the bottom of the reservoir. All AutoPot 30 & 47 L plastic reservoirs are now supplied drilled and with 9mm Top Hat Grommets.

If fitting a 9mm grommet (for AQUAvalve5) to an existing/non-AutoPot plastic reservoir drill out to 12.5mm diameter.

If fitting a 6mm grommet (for older, pre Aug 2020 AQUAvalves) to an existing/non-AutoPot plastic reservoir drill out to 10mm diameter.

The grommet is then inserted into the hole and a length of 9mm or 6mm pipe (according to the grommet used) is then pushed through the grommet. Push the pipe all the way through the grommet so that you can see the tube protruding inside the reservoir.

Use Module Accessory Packs to upgrade your system to AQUAvalve5 with 9mm and 16-9mm pipe and fittings. An AQUAvalve5 Module Accessory Pack will fit into in your existing module trays perfectly. It includes all the fittings you need to connect to 16mm pipe – even 16-9mm cross and tee connectors.

If connecting directly to the reservoir using 9mm pipe you may also require the new 9mm Top Hat Grommet and 9mm Golf Filter or, if your reservoir has a 16mm outlet, the new 16-9mm click-fit adapter and filter.

Alternatively you can maintain older systems in tip-top condition with 6m and 16-6mm pipe and fittings using a 6mm AQUAvalve Module Accessory Pack.