2506 products
2506 products
Sort by:
Use Module Accessory Packs to upgrade your system to AQUAvalve5 with 9mm and 16-9mm pipe and fittings. An AQUAvalve5 Module Accessory Pack will fit into in your existing module trays perfectly. It includes all the fittings you need to connect to 16mm pipe – even 16-9mm cross and tee connectors.
If connecting directly to the reservoir using 9mm pipe you may also require the new 9mm Top Hat Grommet and 9mm Golf Filter or, if your reservoir has a 16mm outlet, the new 16-9mm click-fit adapter and filter.
Alternatively you can maintain older systems in tip-top condition with 6m and 16-6mm pipe and fittings using a 6mm AQUAvalve Module Accessory Pack.
Use Module Accessory Packs to upgrade your system to AQUAvalve5 with 9mm and 16-9mm pipe and fittings. An AQUAvalve5 Module Accessory Pack will fit into in your existing module trays perfectly. It includes all the fittings you need to connect to 16mm pipe – even 16-9mm cross and tee connectors.
If connecting directly to the reservoir using 9mm pipe you may also require the new 9mm Top Hat Grommet and 9mm Golf Filter or, if your reservoir has a 16mm outlet, the new 16-9mm click-fit adapter and filter.
Alternatively you can maintain older systems in tip-top condition with 6m and 16-6mm pipe and fittings using a 6mm AQUAvalve Module Accessory Pack.
This Autopot Accessory Pack is designed specifically for use with the SmartPot Module - (C). It includes all the necessary components to optimize the use of this innovative system, providing efficient watering and nutrient distribution for your plants. With this pack, you can easily maintain healthy and thriving plants without the hassle of manual watering.
Autopot Accessory Pack for SmartPot Module - (C)
The AirDome has been designed to increase the amount of air around the root zone in the pot. If you are lucky enough to have power in your greenhouse this little addition can increase yields by up to 130%. It is very simple to use once assembled, which will take less than 30 seconds. The AirDome is placed at the bottom of the pot, covered with the substrate of choice and then connected to an air pump.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Round will fit our 25 L / 6.6 gal pots and 20 L / 5 gal fabric FlexiPots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Square will fit our 8.5 L / 2.2 gal and 15 L / 3.9 gal pots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
The AQUAbox Spyder offers a revolutionary self-watering solution for Grow Your Own enthusiasts. No mains water supply, pumps or timers are required. Simply connect to an existing water barrel to automatically water a 1.2sq/m area.
Positioned directly in the ground the AQUAbox Spyder is ideal for watering conventional beds or the increasingly popular raised beds. A series of capillary wicks fan out from the AQUAbox Spyder distributing water under the soil, across an area of up to 1.2sq/m.
With the AQUAvalve at its core, the AQUAbox Spyder draws on the water supply (water barrel or tank) as required by the plants, ensuring a fantastically efficient use of water. The roots of the plants instinctively head towards the water source, attaching themselves to the capillary wicks below the soil level. The capillary wicks should be changed every growing season.
Extension kits (link to AQUAbox Spyder Extension) are available to allow connection of multiple units to a single water barrel.
The kit is supplied with 2 metres of 9mm pipe and a reducing connector with integral filter, allowing simple connection to a water barrel tap via a section of standard garden hosepipe (not supplied).
A spirit level in the lid of the AQUAbox Spyder ensures that the AQUAbox is level once positioned in the ground.
The AQUAplate kit contains all you need to adapt your existing AutoPot system for hydroponic growing. Assembled in minutes the AQUAplate simply drops into an AutoPot tray. This seamless integration saves time, expense and allows you to grow in our proven irrigation system.
Grow free from substrate
Give plants direct root access to nutrient rich water
Encourage faster, stronger root development
Contains all you need to adapt your existing AutoPot Watering System for AQUAplate growing
AQUAplate simply drops into an AutoPot tray.
Tips:
We recommend a target water temperature of 64-68°F / 18-20°C
Plants grown without substrate need lower doses of nutrient. Start at half strength and gradually increase.
Add an Airstone to the tray for even greater growth acceleration!
The AQUAvalve is supplied with all the AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used allowing the plant to go through a wet & dry cycle. Once all the water has been used by the plants the AQUAvalve will re-open and refill the tray. The AQUAvalve is a simple but very effective watering device and needs to be treated with care. Keep the AQUAvalve and the tray it sits in clean, free of obstructions, soil particles and it will help you water & feed your plants for many years. The AQUAvalve is guaranteed for 12 months.
Grow what you want, when you want, whilst still enjoying the incredible space and maintenance saving benefits of a tray system. Auto8 15ltr comes complete with eight 15ltr square pots but can also house the 8.5ltr variety – available separately. You can interchange at will – no adjustment to the tray is required.
You can cultivate plants at various stages of development in the same tray system. Swap plants in and out with ease as needed. Minimise repotting and the risk of transplant shock.
The principles of Auto9 XL also apply to Auto8. Multiple pots are irrigated in a single tray and lid assembly by a single AQUAvalve5. Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.
Auto8 15ltr is supplied with eight 15ltr solid pots.
Cultivating with Auto8 benefits growers in three key areas:
Growing Space
Maximises the available area
Ideal for moveable racks and rolling tables
Overheads
Draws no more water than 8 single 1Pot trays
Reduction in components = reduced maintenance duties
Plant Health
Unlike a large, single, flat tray the moulded base minimises standing water
Lid blocks light and debris from entering the tray
Minimum Reservoir Requirements
1x Auto8 – FlexiTank / FlexiTank Pro 100ltr
2x Auto8 – FlexiTank / FlexiTank Pro 225ltr
4x Auto8 – FlexiTank / FlexiTank Pro 400ltr
8x Auto8 – FlexiTank 750ltr
10x Auto8 – FlexiTank 1000ltr
Grow what you want, when you want, whilst still enjoying the incredible space and maintenance saving benefits of a tray system. Auto8 15ltr comes complete with eight 15ltr square pots but can also house the 8.5ltr variety – available separately. You can interchange at will – no adjustment to the tray is required.
You can cultivate plants at various stages of development in the same tray system. Swap plants in and out with ease as needed. Minimise repotting and the risk of transplant shock.
The principles of Auto9 XL also apply to Auto8. Multiple pots are irrigated in a single tray and lid assembly by a single AQUAvalve5. Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.
Auto8 15ltr is supplied with eight 15ltr solid pots.
Cultivating with Auto8 benefits growers in three key areas:
Growing Space
Maximises the available area
Ideal for moveable racks and rolling tables
Overheads
Draws no more water than 8 single 1Pot trays
Reduction in components = reduced maintenance duties
Plant Health
Unlike a large, single, flat tray the moulded base minimises standing water
Lid blocks light and debris from entering the tray
Minimum Reservoir Requirements
1x Auto8 – FlexiTank / FlexiTank Pro 100ltr
2x Auto8 – FlexiTank / FlexiTank Pro 225ltr
4x Auto8 – FlexiTank / FlexiTank Pro 400ltr
8x Auto8 – FlexiTank 750ltr
10x Auto8 – FlexiTank 1000ltr
£284.95
Unit price per£284.95
Unit price perAuto9 XL FlexiPot allows you to irrigate nine 20 L fabric FlexiPots pots in single tray and lid assembly measuring just over a square metre. All fed by a single line to a single valve.
Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.
Cultivating with Auto 9 XL benefits growers in three key areas:
Growing Space
Maximises the available area
Ideal for moveable racks and rolling tables
Overheads
Draws no more water than 9 single XL trays
Reduction in components = reduced maintenance duties
Plant Health
Unlike a large, single, flat tray the moulded base minimises standing water
Lid blocks light and debris from entering the tray
Minimum Reservoir Requirements
1x Auto9 XL FlexiPot – FlexiTank / FlexiTank Pro 100ltr
2x Auto9 XL FlexiPot – FlexiTank / FlexiTank Pro 225ltr
4x Auto9 XL FlexiPot – FlexiTank / FlexiTank Pro 400ltr
8x Auto9 XL FlexiPot – FlexiTank 750ltr
10x Auto 9 XL FlexiPot – FlexiTank 1000ltr
Increase your plant's growth and yield potential with Autopot Clear Propogation Lid for 8.5ltr/15ltr Pots. This clear lid provides an optimal environment for your plants with improved ventilation and light penetration. Made with sturdy materials, it fits perfectly on Autopot pots of different sizes.
The easy2grow system is the preferred system used by commercial growers throughout the world. It offers maintenance free growing with optimum growth without wasting a single drop of water. The easy2grow system will water & feed your plants using 8.5 litre pots without the need for pumps, timers and electricity. Whether using the easy2grow starter kit or multiple easy2grow extension kits on a vast commercial scale this system provides everything the plant requires.
AutoPot easy2progagate propagation made easy easy2Propagate is the largest, most adjustable single piece propagation lid on the market. It’s size and ventilation capacity mean a vast range of climatic options are achievable. easy2Propagate’s size and features deliver entirely new levels of growing potential and plant control. A cavernous 200mm lid height offers your plants more headroom than any other single piece propagator lid available, giving you greater choice as to when you transplant. Four large and fully adjustable vents allow growers unparalleled scope to fine-tune an environment in which young plants can thrive. easy2Propagate ties together the proven growing technology of the AutoPot range. Fitted with four 6mm piping ports, it is designed to accommodate an AQUAvalve for easy integration with low maintenance AutoPot Watering Systems. The lid and kit contents slot together in minutes.
The Autopot Hose Connector (1/2") is a must-have for any gardening enthusiast. Built with precision and durability in mind, this connector ensures a secure and leak-proof connection between your garden hose and Autopot system. With its 1/2" size, it fits perfectly with most standard garden hoses, making watering your plants a breeze. Upgrade your gardening experience with the Autopot Hose Connector (1/2").
Autopot Green Hose Connector Hose Connector 1/2"
The Autopot Lid for 1 Pot Tray is a must-have addition to your gardening setup. This lid is specifically designed for use with Autopot systems and ensures efficient use of water, nutrients, and space. Its innovative design promotes healthy plant growth and eliminates the need for manual watering. Upgrade your gardening game with this expertly crafted lid.
autopot Lid for 1 Pot Tray
Marix Discs are designed to fit the 1Pot system, the easy2grow Kit & the 2Pot extension trays to extend the easy2grow Kit. The discs are black in colour and are placed inside the pot. The purpose of the Marix Disc is to prevent compost or soil from leaving the pot, keeping the system clean & the AQUAvalve free from debris. They will also provide minimum protection from escaping roots. Although the Marix Discs will last several seasons it is advisable to replace the discs at the beginning of each season, this will prevent any disease from being transferred if present.
