5612 products
5612 products
Sort by:
This Autopot Accessory Pack is designed specifically for use with the SmartPot Module - (C). It includes all the necessary components to optimize the use of this innovative system, providing efficient watering and nutrient distribution for your plants. With this pack, you can easily maintain healthy and thriving plants without the hassle of manual watering.
Autopot Accessory Pack for SmartPot Module - (C)
Autopot Accessory Pack for SmartPot Module with 5 Gallon SmartPot - (C)
The AirDome has been designed to increase the amount of air around the root zone in the pot. If you are lucky enough to have power in your greenhouse this little addition can increase yields by up to 130%. It is very simple to use once assembled, which will take less than 30 seconds. The AirDome is placed at the bottom of the pot, covered with the substrate of choice and then connected to an air pump.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Round will fit our 25 L / 6.6 gal pots and 20 L / 5 gal fabric FlexiPots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Square will fit our 8.5 L / 2.2 gal and 15 L / 3.9 gal pots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
The AQUAbox Spyder offers a revolutionary self-watering solution for Grow Your Own enthusiasts. No mains water supply, pumps or timers are required. Simply connect to an existing water barrel to automatically water a 1.2sq/m area.
Positioned directly in the ground the AQUAbox Spyder is ideal for watering conventional beds or the increasingly popular raised beds. A series of capillary wicks fan out from the AQUAbox Spyder distributing water under the soil, across an area of up to 1.2sq/m.
With the AQUAvalve at its core, the AQUAbox Spyder draws on the water supply (water barrel or tank) as required by the plants, ensuring a fantastically efficient use of water. The roots of the plants instinctively head towards the water source, attaching themselves to the capillary wicks below the soil level. The capillary wicks should be changed every growing season.
Extension kits (link to AQUAbox Spyder Extension) are available to allow connection of multiple units to a single water barrel.
The kit is supplied with 2 metres of 9mm pipe and a reducing connector with integral filter, allowing simple connection to a water barrel tap via a section of standard garden hosepipe (not supplied).
A spirit level in the lid of the AQUAbox Spyder ensures that the AQUAbox is level once positioned in the ground.
The AQUAplate kit contains all you need to adapt your existing AutoPot system for hydroponic growing. Assembled in minutes the AQUAplate simply drops into an AutoPot tray. This seamless integration saves time, expense and allows you to grow in our proven irrigation system.
Grow free from substrate
Give plants direct root access to nutrient rich water
Encourage faster, stronger root development
Contains all you need to adapt your existing AutoPot Watering System for AQUAplate growing
AQUAplate simply drops into an AutoPot tray.
Tips:
We recommend a target water temperature of 64-68°F / 18-20°C
Plants grown without substrate need lower doses of nutrient. Start at half strength and gradually increase.
Add an Airstone to the tray for even greater growth acceleration!
The AQUAvalve is supplied with all the AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used allowing the plant to go through a wet & dry cycle. Once all the water has been used by the plants the AQUAvalve will re-open and refill the tray. The AQUAvalve is a simple but very effective watering device and needs to be treated with care. Keep the AQUAvalve and the tray it sits in clean, free of obstructions, soil particles and it will help you water & feed your plants for many years. The AQUAvalve is guaranteed for 12 months.
Grow what you want, when you want, whilst still enjoying the incredible space and maintenance saving benefits of a tray system. Auto8 15ltr comes complete with eight 15ltr square pots but can also house the 8.5ltr variety – available separately. You can interchange at will – no adjustment to the tray is required.
You can cultivate plants at various stages of development in the same tray system. Swap plants in and out with ease as needed. Minimise repotting and the risk of transplant shock.
The principles of Auto9 XL also apply to Auto8. Multiple pots are irrigated in a single tray and lid assembly by a single AQUAvalve5. Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.
Auto8 15ltr is supplied with eight 15ltr solid pots.
Cultivating with Auto8 benefits growers in three key areas:
Growing Space
Maximises the available area
Ideal for moveable racks and rolling tables
Overheads
Draws no more water than 8 single 1Pot trays
Reduction in components = reduced maintenance duties
Plant Health
Unlike a large, single, flat tray the moulded base minimises standing water
Lid blocks light and debris from entering the tray
Minimum Reservoir Requirements
1x Auto8 – FlexiTank / FlexiTank Pro 100ltr
2x Auto8 – FlexiTank / FlexiTank Pro 225ltr
4x Auto8 – FlexiTank / FlexiTank Pro 400ltr
8x Auto8 – FlexiTank 750ltr
10x Auto8 – FlexiTank 1000ltr
Grow what you want, when you want, whilst still enjoying the incredible space and maintenance saving benefits of a tray system. Auto8 15ltr comes complete with eight 15ltr square pots but can also house the 8.5ltr variety – available separately. You can interchange at will – no adjustment to the tray is required.
You can cultivate plants at various stages of development in the same tray system. Swap plants in and out with ease as needed. Minimise repotting and the risk of transplant shock.
The principles of Auto9 XL also apply to Auto8. Multiple pots are irrigated in a single tray and lid assembly by a single AQUAvalve5. Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.
Auto8 15ltr is supplied with eight 15ltr solid pots.
Cultivating with Auto8 benefits growers in three key areas:
Growing Space
Maximises the available area
Ideal for moveable racks and rolling tables
Overheads
Draws no more water than 8 single 1Pot trays
Reduction in components = reduced maintenance duties
Plant Health
Unlike a large, single, flat tray the moulded base minimises standing water
Lid blocks light and debris from entering the tray
Minimum Reservoir Requirements
1x Auto8 – FlexiTank / FlexiTank Pro 100ltr
2x Auto8 – FlexiTank / FlexiTank Pro 225ltr
4x Auto8 – FlexiTank / FlexiTank Pro 400ltr
8x Auto8 – FlexiTank 750ltr
10x Auto8 – FlexiTank 1000ltr
