Top Hat Grommets provide a water tight connection using 9mm or 6mm pipe with the 30 & 47 L plastic reservoirs.

The Top Hat Grommet is positioned at the bottom of the reservoir. All AutoPot 30 & 47 L plastic reservoirs are now supplied drilled and with 9mm Top Hat Grommets.

If fitting a 9mm grommet (for AQUAvalve5) to an existing/non-AutoPot plastic reservoir drill out to 12.5mm diameter.

If fitting a 6mm grommet (for older, pre Aug 2020 AQUAvalves) to an existing/non-AutoPot plastic reservoir drill out to 10mm diameter.

The grommet is then inserted into the hole and a length of 9mm or 6mm pipe (according to the grommet used) is then pushed through the grommet. Push the pipe all the way through the grommet so that you can see the tube protruding inside the reservoir.

A 9mm or 6mm cross connector supplied individually and used to connect four pieces of pipe together. These are useful along with the 9mm or 6mm tee connectors as they provide the user with the ability to create a layout to suit his or her needs.

The AQUAvalve is supplied with all the AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used allowing the plant to go through a wet & dry cycle. Once all the water has been used by the plants the AQUAvalve will re-open and refill the tray. The AQUAvalve is a simple but very effective watering device and needs to be treated with care. Keep the AQUAvalve and the tray it sits in clean, free of obstructions, soil particles and it will help you water & feed your plants for many years. The AQUAvalve is guaranteed for 12 months.

Choose 16-9mm for AQUAvalve5 and 9mm Fittings

A flexible polypropylene net The WebIT R2.00 allows you to keep your crops in the centre of your tent without them collapsing. Each corner is equipped with a hook to facilitate installation and an elastic to give more flexibility. This then creates a safe space between your plants and the mylar.

Secret Jardin Lodge hobbiest The Secret Jardin Lodge is a cultivation and propagation tent that has 3 different compartments, one large to house mature plants and two smaller side compartments to house low power lighting and propagators. The Lodge 120 could also be used to flower smaller plants whilst growing on the next successive crop, creating a much quicker turnover of crops. Like all other Secret Jardin tents, the Lodge is constructed out of thick, quality materials making them strong, sturdy and near impenetrable to the brightest of light. The Lodge 120 is only 150cm tall making it ideal for tighter spaces.

Intense expert Expert grow tents, dedicated to the cultivation of intensive crops. Massive Ø30mm structure and thick tear-proof 900D canvas. Easy access to the plants through side windows and central corridor. Height option: extend the height of your grow tent by 30 or 60cm. Set up your big “grow warehouse” by linking multiple Intense tents together. • High reflective mylar inside (95%) • Stainless steel corners with dual lock mechanism • Up to 75kg equipment at centre • Aluminium tubes 23mm diameter 1.5mm thickness • Strong & washable fabric, 0.6mm thickness • Strong thick base

Dark Room professional New tubes, corners, Mylar & heights The Secret Jardin Dark Room is a premium quality grow tent. Purpose made to accommodate your chosen growing system; it provides the perfect environment for growing plants. The five tube concept reduces spare tube stock levels, to just five different tube sizes per range. This allows easy fulfilment of spare tube requests.

Dark Room professional New tubes, corners, Mylar & heights The Secret Jardin Dark Room is a premium quality grow tent. Purpose made to accommodate your chosen growing system; it provides the perfect environment for growing plants. The five tube concept reduces spare tube stock levels, to just five different tube sizes per range. This allows easy fulfilment of spare tube requests.

Dark Room professional New tubes, corners, Mylar & heights The Secret Jardin Dark Room is a premium quality grow tent. Purpose made to accommodate your chosen growing system; it provides the perfect environment for growing plants. The five tube concept reduces spare tube stock levels, to just five different tube sizes per range. This allows easy fulfilment of spare tube requests.

Designed to fit our DUCTING FLANGE system, our range of extractors can also be used conventionally by adding two DF16100 connectors, 125 or 150mm.

The interface allows you to select temperature, minimum extraction and maximum extraction to optimally regulate your environment.

The 24 volt EC motor allows you to adjust the extraction speed and therefore save 30-40% energy compared to AC extractors.

Once the extractor is installed, you simply connect the corresponding filter to your growing area. Its high capacity activated carbon CTC80 ensures optimal protection for a long time.

Tray2Grow is the completely automated, completely power-free system that offers you five ways to feed and water your plants. Seed trays, small pots, grow bags, micro herbs, and planters, can each be accommodated, making this the most versatile product in the AutoPot range and one of the most versatile irrigation systems period.

Equipped for every eventuality, Tray2Grow includes optional capillary spikes that can be fitted to the inside of the tray. These pierce the underside of a grow bag, allowing you to irrigate the substrate within.

With the spikes removed and capillary matting in place Tray2Grow can take up to four standard sized seed trays, two micro herb trays, any number of bottom-perforated or bio pots, or our capacious 107.5 L / 23.5 gal framed fabric planter. Three guide holes on each side of the tray are provided for garden canes if you’re trellising plants and there are three inset spirit levels to help you ensure everything is 100% horizontal.

See instruction video

https://youtu.be/JFQudIwIma8

PotSocks have been designed to keep even the most agile root system where it belongs… contained in the pot! Enjoy complete peace of mind that your AQUAvalve is safe and free from rogue roots. PotSocks are great for growers cultivating long term crops or simply plants with a very aggressive root system. Available in square or round variations, to fit the easy2grow, 1Pot or XL pots. They’re also the ideal solution for growers using fabric air pruning pots in an AutoPot system.

Developed by AutoPot to meet the demands of the ambitious gardener, featuring an immense 25 litre growing capacity the 1Pot XL is perfect for growers looking to cultivate BIG plants and achieve even BIGGER yields. This original design has a clam shaped tray that accommodates the large volume 25 litre XL pot. The round based pot enables the grower to easily rotate a big plant while the pot is still in the tray. Ideal for large specimen plants, such as Blueberry bushes or Japanese Maples, the 1Pot XL can be used as a single unit system or linked to larger reservoirs to create huge systems of any size or configuration. The 1Pot XL is supplied with all necessary connections and the AQUAvalves that control the water supply to each and every plant in the system, delivering fresh, balanced feed throughout their entire life cycle.

6mm in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 ltr tanks. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

Developed by AutoPot to meet the demands of the ambitious gardener, featuring an immense 25 litre growing capacity the 1Pot XL is perfect for growers looking to cultivate BIG plants and achieve even BIGGER yields. This original design has a clam shaped tray that accommodates the large volume 25 litre XL pot. The round based pot enables the grower to easily rotate a big plant while the pot is still in the tray. Ideal for large specimen plants, such as Blueberry bushes or Japanese Maples, the 1Pot XL can be used as a single unit system or linked to larger reservoirs to create huge systems of any size or configuration. The 1Pot XL is supplied with all necessary connections and the AQUAvalves that control the water supply to each and every plant in the system, delivering fresh, balanced feed throughout their entire life cycle.

A replacement easy2grow (2Pot) Tray and Lid as supplied with AutoPot easy2grow modules and systems. The easy2grow Tray and Lid accepts two 8.5ltr or two 15ltr Square Pots (pots not included). The Tray and Lid may also be used with one or two AQUAplate Square Kits. The tray requires an AQUAvalve and fittings (not included) to function as part of an AutoPot Watering System. We recommend using PotSock Squares (not included) on the bases of your pots to prevent your plant’s roots from impairing the performance of the AQUAvalve

Maximize your Autopot system's efficiency with the Autopot 16mm Tee Connector - (C). This durable connector allows for easy attachment of additional pots and save up to 50% of water usage. Upgrade your gardening game today.

Autopot 16mm Tee Conector PF914/16