2488 products
2488 products
Sort by:
DESCRIPTION
Electrode cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and setiment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode.
Electrode cleaning solution should not be a substitute for rinse and or storage solutions.
Sachet packaging means that you get fresh solution every time. Ideal for infrequent or field use. No risk of using an expired calibration solution.
Milwaukee cleaning solutions are designed to help you achieve reliable and repeatable measurements while extending the life of your electrode.
DESIGN FEATURES
Electrode Cleaning Solution - 20 mL (box of 25).
Fundamental for gently cleaning the electrode between uses and before storage.
Sealed against light and air.
Ideal for on-the-spot cleaning too.
Simply open, insert the tester or electrode into the sachet and gently stir let soak for 15 minutes.
Formulated with a 5 year expiry
DESCRIPTION
The Milwaukee EC/TDS Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results.
DESIGN FEATURES
Measures conductivity (EC) and total dissolved solids (TDS) with automatic temperature compensation.
Ideal range for Hydroponics (0.2 to 4 mS/cm | 2 to 40 CF | 140 to 2800 ppm 0.7 scale | 100 to 2000 ppm 0.5 scale).
Units directly in mS/cm/CF/PPM (no conversions required).
Factory calibrated no continious calibration required.
High accuracy.
Automatic Temperature Compensation (ATC).
Auto on/off feature.
Blue LED display.
Graphite electrode in ABC + PC body.
Battery level indicators.
Battery life up to 3 years with approx. 10 measurements per day.
3 X 1.5V AA (batteries included).
DIGITAL. SIMPLE. COMPACT.
The Milwaukee Conductivity Pen is designed for hydroponic and other growers to help you make sure that your plants are receiving the right amount of nutrient. Keep EC in your target range to help your achieve better results.
DESIGN FEATURES
Measures conductivity and temperature with automatic temperature compensation
Ideal range for hydroponics (0 to 20,000 µS/cm)
Units in µS/cm easily convertable to ppm
Factory calibrated with the ability to recalibrate if needed
350 hours continuous use (3 x 1.5V batteries included)
DESCRIPTION
The Milwaukee Conductivity Pen is designed for hydroponic and other growers to help you make sure that your plants are receiving the right amount of nutrient. Keep EC in your target range to help your achieve better results.
DESIGN FEATURES
Measures conductivity and temperature with automatic temperature compensation
Ideal range for hydroponics (0.00 to 10.00 mS/cm)
Units in mS/cm easily convertable to ppm
Factory calibrated with the ability to recalibrate if needed
Replaceable electrode
Fully waterproof to IP65
250 hours continuous use (3 x 1.5V batteries included)
T5 low power florescent grow lights These light units are designed for small plants and cuttings. Very little heat is emitted and so the unit can be placed very close to plant-top height without fear of scorching. These units also have low power consumption in relation to traditional HID lighting systems. Choice of EnviroGrow or Maxibright. Available in 4 sizes. • 2ft x 2 Lamp unit 48w • 2ft x 4 Lamp unit 96w • 4ft x 4 Lamp unit 216w • 4ft x 8 Lamp unit 432w
Products > Plant Lighting
LightWave T5 LW48-HO
4ft 8-tube – 432 W (8 x 54 W tubes included) 1190 x 640 x 60 mm
This is the big one, designed to cover a full 1.2 metre square of useful propagation area and support hundreds of new young plants.
2ft 2-tube – 48 W (2 x 24W tubes included) 600 x 230 x 60 mm.
The smallest model – ideal for lighting a propagator – or a shelf of houseplants.
HYGROTHERMO PREMIUM
Indoor Thermometer with hygrometer
Accuracy 1º C RH 5%
Indoor-hygro range 25% RH to 90%
Temperature range: 0º - 50º / 32º - 122º F
HYGROTHERMO MEDIUM
Indoor Thermometer with hygrometer
Accuracy 1º C RH 5%
Indoor-hygro range 25% RH to 90%
Temperature range: 0º - 50º / 32º - 122º F
Therma-Hygrometer combined hygrometer and thermometer for panel mounting
displays temperature & humidity
easy panel-mounting installation
maximum, minimum temperature & humidity function
incorporates screw-clampThis panel mounted therma-hygrometer for panel simultaneously displays both humidity over the range of 20 to 99%rh and temperature over the range of 0 to 49.9°C with a resolution of 1%rh and 0.1°C. This thermo hygrometer is ideal for OEMs for installing into equipment, i.e. vivariums, incubators and similar.
The therma-hygrometer is easily installed into a panel via a mounting hole with a minimum Ø33 mm cut-out. The unit incorporates a screw clamp with a maximum panel thickness of 7 mm.
The hygro-thermometer features a max/min memory function for both temperature and humidity. The instrument can be panel mounted via a minimum Ø33mm cutout and is powered by a CR2032 coin cell battery with a life expectancy of 5000 hours continuous use.
The Mini RayTemp infrared thermometer is a compact, lightweight and low cost infrared thermometer. Simply aim and pull the trigger to display the temperature of the item being measured. The Mini RayTemp® measures temperature over the range of -50 to 330°C with an assured accuracy of ±2°C over the range of 0 to 330°C, outside of this range (-50 to 0°C) accuracy is ±4°C. This infrared thermometer has a clear, easy to read, LCD display with low battery, and backlight indication and an auto power off facility that turns the instrument off after 10 seconds, maximising battery life. The Mini RayTemp® is ideal for numerous temperature measurement applications where contact with the item to be measured is an issue. The Mini RayTemp also incorporates laser assisted alignment as standard, to assist in pin-pointing the area of measurement. The unit incorporates a 12:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.95 making it suitable for a wide range of food and industrial applications. RayTemp® is a registered trademark
The 8100 Plus pH meter is a three-in-one instrument that features a large easy to read, LCD display that indicates pH over the range of -2 to 16 pH with a resolution of 0.01 pH, mV over the range of -1000 to 1000 mV and temperature over the range of -39.9 to 149.9 °C with a resolution of 0.1 °C. The LCD display features both low battery indication and an user selectable backlight. The pH readings are either manually or automatically temperature compensated over the operating range of 0 to 80°C. To automatically compensate, it is necessary to utilise a thermistor temperature probe. Each unit incorporates an auto-power off facility that automatically turns the instrument off after ten minutes, maximising battery life. The 8100 Plus has an integrated rubber seal to ensure complete water resistance and helps to reduce the possibility of damage in harsh environments.
Connect automaticly with your room on the go, includes 16A on / off function for heater / water system or humidifier
Bluelab Pulse Multimedia EC/MC Meter
3-in-1 digital soil handheld meter measuring moisture, nutrient and temperature directly in growing media.
Measure directly in the root zone
Measure in a range or growing media
All 3 measurements in under 10 seconds
Connects directly to your phone via the Bluetooth Pulse App
App provides automated data collection & measurement comparison
Available for Android (5.1+) Bluetooth (4.0+) & iOS 12.1 or later
Probe length 200 mm/8"
1x AA battery included
1x Phillips head screwdriver (for battery installation)
1-year guarantee
Bluelab Probe Care Kit - pH
A complete maintenance kit for Bluelab pH Probes.
pH Probe care instructions
20 ml single-use Bluelab Solution Sachets, 2 each of pH7.0, pH 4.0, and KCl
3x plastic cups
Bluelab pH Probe Cleaner Solution
Bluelab Toothbrush (pH probe cleaning instrument)
Bluelab Probe Care Kit - Conductivity
A complete maintenance kit for Bluelab Conductivity Probes.
Conductivity Probe care instructions
2x 20 ml single-use Bluelab Solution Sachets, 2 of 2.77 EC Conductivity Standard Solution
Plastic cup
Bluelab Conductivity Probe Cleaning Solution
Bluelab Chamois (conductivity probe cleaning instrument)
Bluelab Pro Controller Connect
Automated, constant control of reservoir pH & nutrient levels. When connected to a dosing system it manages pH & conductivity levels in reservoirs. Your pH & nutrient levels are automatically adjusted to the desired set point. Allows you to monitor, log data & control in real-time for immediate response to personalised settings & system alerts.
Customise your system by pairing with the relevant Bluelab PeriPod
Includes Connect Stick 2
2 year guarantee for Bluelab Pro Controller, Pro Controller Conductivity Probe & Bluelab Temperature Probe
6 month guarantee for Bluelab pH Probe
pH Pen pH measurement Plants get their nutrients from minerals, but they can only get all the right minerals they need if certain conditions are right. Think of nutrients like a lock. pH is the key. A key factor that affects food uptake is whether your solution is acid or alkaline. We measure this in pH. The Bluelab pH Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 - 22˚C or 65 - 72˚F is recommended. The hand held pH pen provides a compact quick and handy way to manage the success of your crop to ensure maximum uptake of nutrients. Teamed with our Bluelab ppm or EC Pen, you have a handy, convenient and accurate system for ensuring optimum plant growth and health.
